Apricot (Prunus armeniaca L.) is the most common, high-income generative fruit and consequently plays an important part in region's socio-economic growth. However, apricots are susceptible to several diseases pests that cause lower yields significant financial losses, including apricot shot hole disease brought on by Wilsonomyces carpophilus, a polyphagous fungus, creates serious threat stone f...

this study is focused on investigating the parameters of laser percussion drilling process of nickel-base super alloy inconel 718 with thickness of 1 mm. fiber laser with the power of 500 watts was used as the laser source. laser pulse frequency, duty cycle, laser power, focal point position, were assumed as the laser drilling process variables. the hole geometry features, i.e. entrance hole di...

The effect of an electroless Ni-Cu-P coating on the fatigue behavior of quenched and tempered CK45 steel has been investigated. The fatigue tests under rotating bending conditions have been conducted in three different conditions of uncoated, as-deposited and shot peened prior to the coating deposition. The results indicate that plating of the base steel leads to a fatigue life reduction. The d...

In the present research, the mixed-mode fracture mechanics analysis in a plate with central hole under tensile loading is considered. It is assumed that a plate containing two symmetrical hole-edge cracks is bonded with two dissimilar planes. The stress intensity factors at the crack tips are calculated. The problem is modeled in Casca software and this model is analyzed with Franc software. Th...

Conventional crosswell surveys are expensive because a source must be placed downhole, which means that the hole must be prepped and placed off-line for a number of days. We suggest an interesting but unproven alternative: place a source on the surface, drop a simple obstruction-like device downhole that scatters tube wave arrivals from the surface source, and use the scattered tube waves energ...

Roll forming process is used for manufacturing sheet metal parts by successive bending and creating the final shape with gradual deformation. In this article, deformation of a pre-punched sheet due to the roll forming process was studied. Two main defects in the roll forming process are ovality of holes and bow defect. The ovality of the hole is influenced by the process parameters including sh...