The present paper discusses sintered glass–ceramics with attractive appearance, which are obtained by vitrification of hazardous industrial wastes. The chemical durability of parent wastes and resulting glasses was characterised by toxic characteristics leaching procedure (TCLP). The crystallisation behaviour was evaluated by DTA and XRD, while the structure of materials was observed by optical...

This paper describes a framework to combine tabling evaluation and constraint logic programming (TCLP). While this combination has been studied previously from a theoretical point of view and some implementations exist, they either suffer from a lack of efficiency, flexibility, or generality, or have inherent limitations with respect to the programs they can execute to completion (either with s...

Abstract Municipal solid waste incineration (MSWI) has been adopted in Indonesia to reduce the volume and mass of municipal waste. However, as a by-product combustion, fly ash generation cannot be avoided. It can cause an environmental problem if not managed properly. Hence, this study aims investigate characteristics generated from Indonesia’s first waste-to-energy pilot plant its potential ut...

In this work preparation of sulfonic acid functionalized magnetite encapsulated zirconia (Fe3O4@ZrO2-SO3H) has been reported. Structural, chemical, and magnetic properties of the magnetically supported catalyst have also been investigated by Fourier transform infrared (FT-IR) spectroscopy, wide angle X-ray diffraction spectroscopy (WXRD), thermal gravimetric analysis (TGA), energy dispersive X-...

Batch adsorption of recalcitrant melanoidin using the abundantly available coal fly ash was carried out. It had low specific surface area (SBET) of 1.7287 m2/g and pore volume of 0.002245 cm3/g while qualitative evaluation of the predominant phases in it was done by XRD analysis. Colour removal efficiency was found to be dependent on various factors studied. Maximum colour removal was achieved ...

background: the occurrence of heavy metals in the environment is of important concern due to their toxicity and health effects on humans, including cancer. because metals have been extensively used for centuries in commerce, environmental contamination is widespread; moreover, exposure to metals and metal compounds continues to be a significant public health problem. electroplating sludge conta...

In the present work, thermal treatment was used to stabilize municipal solid waste incineration (MSWI) fly ash, which was considered hazardous waste. Toxicity characteristic leaching procedure (TCLP) results indicated that, after the thermal process, the leaching concentrations of Pb, Cu, and Zn decreased from 8.08 to 0.16 mg/L, 0.12 to 0.017 mg/L and 0.39 to 0.1 mg/L, respectively, which well ...

This study aims to examine the influence of untreated coal waste (UCW) and treated (TCW) as supplementary cementitious materials (SCMs) on environmental, mechanical, durability, microstructural characteristics mortar mixes. UCW preparation procedure consists sequential steps crushing grinding. Afterward, is thermally activated through incinerating at 750 °C be promoted TCW. Experimental work in...