The objective of the research is to diminish unwanted forces generated by rotation and unbalanced rotor mass on the rotor of an electrical machine. These forces, dependent on rotational speed, cause vibration that, when occurring in the machine’s natural frequency, causes severe problems. Extra windings are built in the stator of the machine, and they are supplied with current to create an oppo...

In this description of the Enigma rotor movement sequence the following conventions have been adopted. The three rotors are numbered from right to left as seen from the machine operator’s viewpoint thus, the ‘fast’ or right hand rotor is Rotor 1, Rotor 2 is in the middle position and the ‘slow’ or left hand rotor is Rotor 3. The associated ratchets, stepping levers and notches are similarly des...

The performance of an Indirect Rotor Field-Oriented Control (IRFOC) scheme for Induction Motors (IMs) is strongly dependent on the motor parameters especially, rotor resistance. As such, to ensure high performance drive system, the variation of the rotor resistance due to the temperature increase need to be estimated based on the available terminal variables. However, the algorithm used to esti...

Received Sep 19, 2017 Revised Oct 27, 2017 Accepted Nov 11, 2017 This paper present steady state and dynamic (Transient) models of the doubly fed induction generator connected to grid. The steady state model of the DFIAG (Doubly Fed Asynchronous induction Generator) has been constructed by referring all the rotor quantities to stator side. With the help of MATLAB programming simulation results ...

Potential wind-energy development in the eastern Rocky Mountain foothills of British Columbia, Canada, raises concerns due to its overlap with a golden eagle (Aquila chrysaetos) migration corridor. The Dokie 1 Wind Energy Project is the first development in this area and stands as a model for other projects in the area because of regional consistency in topographic orientation and weather patte...

A mutual model reference adaptive system (MRAS) is proposed to implement a position sensorless field-orientation control (FOC) of an induction machine. The reference model and adjustable model used in the mutual MRAS scheme are interchangeable. Therefore, it can be used to identify both rotor speed and the stator resistance of an induction machine. For the rotor speed estimation, one model is u...

We study the spin-up dynamics of a dual-spin spacecraft containing one axisymmetric rotor which is parallel to one of the principal axes of the spacecraft. It will be supposed that one of the moments of inertia of the platform is a periodic function of time and that the center of mass of the spacecraft is not modified. Under these assumptions, it is shown that in the absence of external torques...

This paper presents a rotor position estimation technique for a 6/4 switched reluctance machine based on Adaptive Neuro fuzzy Inference System (ANFIS). This technique is applied for modelling the nonlinear rotor position of SRM using the magnetization characteristics of the machine. ANFIS has a strong nonlinear approximation ability which could be used for nonlinear modelling and its real time ...

Usually, the characteristic values of a synchronous machine are obtained from a short-circuit test at no-load. This test requires substantial equipment and is therefore expensive, it implies risks and it can not be always carried out for levels of voltage higher than 50% to 60% of nominal voltage. This DC decay test is an interesting alternative since only light equipment is needed. It delivers...

Brushless Doubly-Fed Machine has attracted considerable attention in recent years due to its advantages. It has the robustness of the squirrel cage induction machine, and the speed and power factor controllability of the synchronous machine as well as the absence of brushes and slip rings, and using a fractionally rated frequency converter. Hence, there are considerable benefits over the conven...