The retention of zirconia-based ceramic posts (CosmoPost system) luted with glass ionomer and resin cements was evaluated. Thirty-two extracted, caries-free, unrestored teeth were selected and stored in chlorhexidine and water solution. The teeth were endodontically treated and randomly assigned to two groups (n=16). Each tooth was decoronated and prepared to a depth of 10.0 mm from root surfac...

PURPOSE The aim of this study was to evaluate the effects of abutment diameter, cement type, and re-cementation on the retention of implant-supported CAD/CAM metal copings over short abutments. MATERIALS AND METHODS Sixty abutments with two different diameters, the height of which was reduced to 3 mm, were vertically mounted in acrylic resin blocks with matching implant analogues. The specime...

Objectives Acrylic resins are one of the most important denture base materials in dentistry due to their favourable mechanical and physical properties. The purpose of present study is to compare 4 available acrylic flexural strength properties before and after thermocycling. Methods Acrylic resin specimens of Meliodent (Heraeus Kulzer, Hanau, Germany), Vertex (Vertex-dental BV, Zeist, Netherla...

BACKGROUND AND AIMS Effect of surface treatments on repair bond strength of aged composite resins might be different due to their dissimilar fillers. The aim was to evaluate the effect of different surface treatments on repair micro-shear bond strength (µSBS) of silica- (Spectrum TPH) and zirconia-filled (Filtek Z250) composite resins. MATERIALS AND METHODS Twenty-seven composite resin blocks...

PURPOSE To evaluate the effects of hydrofluoric acid etching and Er,Cr:YSGG laser irradiation on the shear bond strength of resin cement to lithium disilicate ceramic. MATERIALS AND METHODS Fifty-five ceramic blocks (5 mm × 5 mm × 2 mm) were fabricated and embedded in acrylic resin. Their surfaces were finished with 1000-grit silicon carbide paper. The blocks were assigned to five groups: 1) ...

OBJECTIVE Incremental placement and curing of resin composites has been recommended. However, this requires longer operating time, and therefore, increased risk of contamination. The purpose of this study was to evaluate the effects of blood contamination on microtensile bond strengths (microTBS) between resin interfaces and to determine the best decontamination method to re-establish the origi...

The purpose of this study was to evaluate the shear bond strength of two resin composites around different types of fiber posts. Twenty post specimens were prepared for three types of fiber posts. Posts were embedded in acrylic resin blocks with half of the post diameter exposed. The exposed portions of the posts were successively ground with silicon carbide paper until flattened flush with the...

We sought to evaluate immediate and delayed micro-tensile bond strength of Panavia F2.0 and Multilink Sprint resin cement to superficial, deep and cervical dentin. Thirty-six freshly extracted non-carious human molars were sectioned in the mesiodistal direction to expose three different dentin regions including superficial dentin (1 mm below the dentine-enamel junction), deep dentin (1 mm above...

Purpose: This study evaluated the influence of surface treatments on the microtensile bond strength between a glass fiber post surface and resin cements. Methods: Forth-five posts (Reforpost, Angelus, Londrina, PRBrazil) were assigned to three groups with different surface treatment: Group 1: No treatment and silane application only (G1); Group 2: immersion in 96% ethyl alcohol for 10 minutes f...

statement of problem: ceramics as in ceramo-metallic and all ceramic tooth restorations have grown popular owing to their high tissue compatibility and esthetic advantages. such restorations have the capability to deliver valuable services over a long period of time; however, failures under intraoral conditions are not unanticipated. purpose: the purpose of this in-vitro study was to investigat...