The use of fiber reinforced polymer (FRP) bars in reinforced concrete members enhances corrosion resistance when compared to traditional steel reinforcing bars. Although there is ample research available on the behavior of FRP bars and concrete members reinforced with FRP bars under elevated temperatures (due to fire), there is little published information available on their post-fire residual ...

There is a growing need for the rehabilitation, repair, and upgrading of concrete structures such as bridges and buildings. The repair or rehabilitation of reinforced concrete structures often offers a lower cost alternative to rebuilding, and it is traditionally achieved by bonding steel plates to the tensile face of a reinforced concrete member. The shear strength can be enhanced with plates ...

steel corrosion of bars in concrete structures is a complex process which leads to the reduction of the cross-section bars and decreasing the resistance of the concrete and steel materials. in this study, reliability analysis of a reinforced concrete beam with corrosion defects under the distributed load was investigated using the enhanced hasofer-lind and rackwitz-fiessler (ehl-rf) method base...

The ultimate strength of reinforced concrete slabs is frequently governed by the punching shear capacity, which may be increased with addition of traditional fitments such as reinforcing steel, headed studs or shear heads. In addition to these traditional methods of strengthening against punching, steel fibre reinforcement has proved to be an effective and viable alternative. The addition of fi...

This paper in essence presents comparative experimental data on the mechanical performance of steel and synthetic fibre-reinforced concrete under compression, tensile split and flexure. URW1050 steel fibre and HPP45 synthetic fibre, both with the same concrete design mix, have been used to make cube specimens for a compression test, cylinders for a tensile split test and beam specimens for a fl...

Basalt fiber, as a natural silicate has excellent engineering performance in high and low temperature resistance, fracture strength, toughness, shear elastic modulus nature. Shotcrete was widely used tunnel lining, slope support, coal mine roadway other projects. With the continuous development of shotcrete technology, scholars found that adding fiber to would greatly improve shotcrete. Compare...

cost optimization of the reinforced concrete cantilever soil retaining wall of a given height satisfying some structural and geotechnical design constraints is performed utilizing harmony search and improved harmony search algorithms. the objective function considered is the cost of the structure, and design is based on aci 318-05. this function is minimized subjected to design constraints. a n...

This paper presents the performance-based optimization of strut-and-tie models in reinforced concrete beam-column connections. The performance-based optimization (PBO) technique is employed to investigate optimal strut-and-tie models in reinforced concrete beam-column connections. Developing strut-and-tie models in reinforced concrete beam-column connections is treated as a topology optimizatio...

Nowadays, concrete with strength higher than 50 MPa is utilized due to the ever increasing need for higher strength and prolonged healing properties. Despite the widespread use of high-strength concrete, only a few research projects have been conducted on the punching shear strength of high-strength concrete slabs. Reinforced concrete flat slabs are widely employed in structural systems. The lo...

The interface between concrete and steel in reinforced concrete governs the interaction between the two types of materials under loading. When the interface is seriously damaged, such that a macro-crack is formed, de-bonding takes place or large slip occurs, and the load-transferring capacity of the interface will drop dramatically. In this study, a vibration-based method is presented to detect...