A non-destructive measuring technique to determine the fiber content in hardened steel fiber reinforced concrete is presented. The technique is based on an accurate open-ended coaxial probe reflectometry method for measuring the effective permittivity of the fiber reinforced concrete and on a mixing rule from the classical homogenization theory for deriving the fiber content from the measured p...

Measurements have been made of the temperature distribution in the antenna backing structures on the 6 m diameter antennas of the BIMA Array at Hat Creek. 32 thermistors were distributed around the backing structure and on one panel and were monitored under varying conditions. Significant gradients were found between the front and rear of the backing structure, across the structure, and radiall...

This work focuses on assessing costs and effectiveness of climate adaptation strategies for existing reinforced concrete structures subject to chloride penetration and climate change. We will study on existing reinforced concrete structures built in France at different years under different building codes. Concerning environmental actions, we considered historical meteorological data and two cl...

fiber reinforced concrete (frc) has been widely used due to its advantages over plain concrete such as high energy absorption, post cracking behaviour, flexural and impact strength and arresting shrinkage cracks. but there is a weak zone between fibers and paste in fiber reinforced concretes and this weak zone is full of porosity, especially in hybrid fiber reinforced concretes. so it is necess...

Polyetheretherketone (PEEK) was reinforced with 0-50 vol% hydroxyapatite (HA) whiskers using a novel powder processing and compression molding technique which enabled uniform mixing at high whisker content. Texture analysis showed that viscous flow during compression molding produced a preferred orientation of whiskers along the specimen tensile axis. Consequently, the elastic modulus or ultima...

The steel frame reinforced with steel shear wall is a lateral load resisting system and has higher strength and shear performance than the concrete shear wall system. Especially, using corrugated steel plates in these shear wall systems improves out-of-plane stiffness and flexibility in the deformation along the corrugation. In this paper, a cyclic loading test of this steel frame reinforced wi...

In this work, attempts are made to study the dispersion of Love waves in dry sandy layer sandwiched between fiber reinforced layer and inhomogeneous half space.Inhomogeneity in half space associated with density and rigidity and considered in exponential form. Displacement components for fiber reinforced layer, dry sandy layer and inhomogeneous half-space have been obtained by using method of s...

The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...

Corrosion of steel is one of the most important potential dangers and threats in concrete structures. Corrosion of steel embedded in reinforced concrete plays a key role in reducing the strength and durability of reinforced concrete. Several studies have proposed that alternative approaches to enhancing the performance of reinforced concrete and its resistance to corrosion. In this study, the r...