The Cosserat theory of elastic rods has been used in a wide range of application domains to model and simulate the elastic deformation of thin rods. It is physically accurate and its implementations are efficient for interactive simulation. However, one requirement of using Cosserat rod theory is that the tubular object must have rigid cross-sections that are small compared to its length. This ...

Context. The stability properties of toroidal magnetic flux tubes are relevant for the storage and emergence of magnetic fields in the convective envelope of cool stars. In addition to buoyancyand magnetic tension-driven instabilities, flux tubes are also susceptible to an instability induced by the hydrodynamic drag force. Aims. Following our investigation of the basic instability mechanism in...

exposure to radiation from different types of television sets was measured to ascertain the levels of hazards posed to the human biological system. measurement of the annual radiation dose hazards was performed using a halogen-quenched gm tube with thin mica end window having a density of 1.5 mg/cm2, effective window diameter of 0.360 inch and side wall of 0.012 inch thick. the gm tube was plac...

in this paper the numerical analysis of flow and time dependent heat transfer of micro-tube conveying nanofluid in laminar flow is investigated. in this study, convection heat transfer of nanofluid and base fluid and transient analysis for time-varying heat flux for time step of 0.0001 second are elucidated. it is observed that the pumping power of nanofluid flowing and the maximum temperature ...

AIMS To describe a method of securing indwelling O'Donohughe's lacrimal tubes in dacryocystorhinostomy using two 3-4 mm Watski sleeves. METHODS The operative technique used to secure the sleeves into position on the lacrimal tubes is described. Forty seven procedures with a follow up ranging from 3 to 30 months (mean 10 months) are reviewed. RESULTS The tubes and sleeves were well tolerated...

Abstract A boiler is one of the most significant components in a steam power plant system, as from used to crank turbine, which drives an electric generator. sootblower piece equipment that cleans ash and scale has built up on pipes. The heat-transfer pipes have been reduced. When soot builds or riser boiler’s walls, heat transfer impeded, resulting less transfer. amount produced by will decrea...

Application of nanofluid and coiled tubes are two passive methods for increasing the heat transfer. In the present study, the turbulent flows of water and nanofluid in coiled tubes heat exchanger were numerically studied. CuO-water nanofluid containing 1 vol% copper oxide nanoparticles was used and single-phase approach was considered for nanofluid flow. The effect of different geometrical para...

Background and Aims: Blood collection tubes (BCT) with gel separators are diagnostic devices that can affect all laboratory processes. In this study, the aim was to compare the performance of a new brand of BCT with the sample tubes that are well-known and widely used in the market. Materials and Methods: Blood samples were taken from 50 healthy volunteers to two brands of BCTs (KWS and BD Vac...

Exposing Pseudomonas aeruginosa biofilm grown on the inner surface of Teflon and silicone tubes to UVC light (265 nm) from light emitting diodes (LED) has previously been shown to substantially reduce biofilm growth. Smaller UVC fluencies were required to disinfect Teflon tubes compared to silicone tubes. Light propagation enhancement in tubes can be obtained if the refractive index of the intr...

Hydrogel tubes of poly(2-hydroxyethyl methacrylate-co-methyl methacrylate) (p(HEMA-co-MMA)) made by liquid-liquid centrifugal casting are being investigated as potential nerve guidance channels in the central nervous system. An important criterion for the nerve guidance channel is that its mechanical properties are similar to those of the spinal cord, where it will be implanted. The formulated ...