In this paper, a novel membrane triiodide sensor based on a charge-transfer complex of (1,3-diphenyldihydro-1H-imidazole-4,5-dionedioxime) with iodine (CTCI) as a membrane carrier is introduced. The best performance was obtained with a membrane containing 30% polyvinylchloride (PVC), 63% dibutylphthalate (DBP), 5% CTCI and 2% hexadecyltrimethylammonium bromide (HTAB). The electrode shows a Nern...

A highly selective electrode for Bromide ion based on aza pyrilium derivative as an excellentionophore is described.The sensor exhibits a good linear response with a slope of ( 60±1 ) mV per decadeover the concentration range of ( 1×10-3 – 9×10-6 M ) , and a detection limit of ( 3×10-6 M ) of Bromideions .The electrode response is independent of pH in the range of(4.0 –9.5).Selectivity coeffici...

fe2+ ion-selective membrane sensor has been fabricated from polyvinyl chloride (pvc) matrixmembrane containing neutral carrier tetra phenyl porphyrin (tpp) ionophore. the addition ofsodium tetraphenylborate (natpb) and the plasticizer dbp has been found to substantiallyimprove the performance of the sensor. the best performance was obtained with the sensor havinga membrane of composition of tpp...

in this work, novel thin film composite membranes (tfcs) of poly (ether-6-block amide) (pebax-1657) on a polyvinyl chloride (pvc) ultrafiltration membrane as support were prepared using inclined coating method for co2 separation. investigating the effects of top selective layer thickness formed by controlling the coating angle (15-60°) and polymer solution concentration (5-10 wt.%), and also, t...

A novel potentiometric ion-selective PVC membrane sensor for analysis of atorvastatin (AT) in pharmaceutical preparations based on atorvastatin-(tetraphenyl borate), (AT-(TPB)2) as sensing element, tetraphenyl borate as additive and tris-2-ethyl-hexyl phosphate (TOP) as plasticizer solvent was prepared. The electrode shows a good Nernestian response over the concentration range of 0.09-5586 μg ...

A copper(II) ion-selective PVC membrane sensor based on 2-(1'-(4'-(1''-hydroxy-2''-naphthyl)methyleneamino)butyl iminomethyl)-1-naphthol (BHNB) as a novel Schiff base containing a sensing material has been successfully developed. The sensor exhibits a good linear response of 29 mV per decade within the concentration range of 10(-1)-10(-6) M of Cu2+. The sensor shows good selectivity for copper(...

A PVC-membrane ion-selective electrode was constructed for quantitative monitoring of gadolinium(III) ion based on 3-methyl-1H-1,2,4-triazole-5-ylhydrosufide (MTY) as an ion carrier. The electrode performance includes a Nernstian slope of 19.8 ± 0.4 mV per decade across a wide concentration range between 1.0 × 10 and 1.0 × 10 M and a detection limit of 7.3 × 10 M. The best performance was obtai...

New PVC membrane electrodes for the determination of sulfadiazine (SDZ) are presented. The electrodes are fabricated with conventional and tubular configurations with a graphite-based electrical contact, and no internal reference solution. The selective membranes consist of bis(triphenylphosphoranilidene)ammonium.SDZ (electrode A), tetraoctylammonium bromide (electrode B), or iron(II)-phthalocy...

A new pyrilamine coated graphite electrode (CGE) based on pyrilamine-tetraphenylborate ion-pair (Pyra-TPB) as electroactive material has been described. The sensor exhibited a linear response with a good Nernstian slope over a relatively wide range of concentration. The membrane film of the electrode made of 3% (w/w) ion-pair, 48.5% DBP (w/w) and 48.5% PVC (w/w). The sensor displays Nernstian r...

A study was carried out to characterize Ni-Co-PVC and Ni-Cu-PVC composite materials prepared by mechanical alloying technique (MAT) using SEM, EDS and electrochemical test. Composite materials were prepared by mixing together 95% of metal powder (Ni+Co or Ni+Cu) with 5% PVC. PVC was used as a binder and tetrahydrofuran (THF) was used as a solvent in composite material preparation. Based on the ...