نتایج جستجو برای: ptfeco alloy
تعداد نتایج: 52245 فیلتر نتایج به سال:
The material flow and microstructural evolution in the friction stir welds of a 6061-Al alloy to itself and of a 6061-Al alloy to 2024-Al alloy plates of 12.7 mm in thickness were studied under different welding conditions. The results showed that plastic deformation, flow, and mechanical mixing of the material exhibit distinct asymmetry characteristics at both sides of the same and dissimilar ...
Study on Microstructure and Mechanical Properties of Hypereutectic Al–18Si Alloy Modified with Al–3B
An hypereutectic Al-18Si alloy was modified via an Al-3B master alloy. The effect of the added Al-3B and the modification temperature on the microstructure, tensile fracture morphologies, and mechanical properties of the alloy were investigated using an optical microscope, Image-Pro Plus 6.0, a scanning electron microscope, and a universal testing machine. The results show that the size of the ...
objective(s): metal nanoparticles (nps) offer a wide variety of potential applications in pharmaceutical sciences due to the unique advances in nanotechnology research. in this work, bimetal ag-au alloy nps were prepared and their combinations with other antibiotics were tested against staphylococcus aureus. materials and methods: firstly, ag-au alloy nps with au/ag molar ratio of 1:1 was f...
The puprose of this study was to evaluate retention force of conical double crowns in two material connections: gold casting alloy/gold casting alloy and gold casting alloy/gold electroforming alloy. 12 crown pairs of both material connections with the cone angles of 2°, 4° and 6° were made. Experiment of 10.000 in-and-out cycles was performed using a new device which allows the retentive force...
In this study, the grindability of cast magnetic alloys (Fe-Pt-Nb magnetic alloy and magnetic stainless steel) was evaluated and compared with that of conventional dental casting alloys (Ag-Pd-Au alloy, Type 4 gold alloy, and cobalt-chromium alloy). Grindability was evaluated in terms of grinding rate (i.e., volume of metal removed per minute) and grinding ratio (i.e., volume ratio of metal rem...
An Aluminum based in-situ alloy reinforced with Mg2Si and Si hard particles produced by casting Al-6Si-0.5Mg alloy. The microstructure, tensile properties and fracture behavior of the alloy were investigated and the results show that the Mg2Si and Si hard particles produced by precipitation hardening have great effects. The homogenized (24hr at 500 o C) and solutionized (2hr at 540 o C) cast al...
In this study we examined the hypothesis based on relevant literature survey that the in vitro corrosion behavior of a Cobalt-chrome dental casting alloy for metal-ceramic restorations is better than that of a Nickel-chrome dental casting alloy. The corrosion released metal ions were analysed by Inductively Coupled Plasma-Atomic Emission Spectroscopy. Moreover, the specimens were electrochemica...
In this study, Al-17%Si alloys were dual modified by fine-grained structural materials (FSM) according to structural heredity. Microstructure and thermal analyses were undertaken to study the modification effect of the FSM master alloy on primary and eutectic Si. Primary Si is refined to a smaller size and eutectic Si is modified from needle-like to fibrous shape after FSM master alloy addition...
This paper presents the wear characteristics of the composite ceramic coating made with Al2O3-40wt%8YSZ on the biomedical grade Ti-6Al-4V alloy (grade 5) used for total joint prosthetic components, with the aim of improving their tribological behavior. The coatings were deposited using a plasma spraying technique, and optimization of plasma parameters was performed using response surface method...
Intergranular stress corrosion cracking (IGSCC) of Alloy 132 weld metal in light water reactor (LWR) structural components is a great concern. The microstructure of Alloy 132 is dendritic and the grain boundaries that are parallel to the direction of the dendrites growth are known to be most susceptible to cracking. In order to correlate the grain boundary microstructure to IGSCC, and in genera...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید