Underlying fabrics can change the appearance, function and quality of the garment, and also add so much longevity of the garment. Nowadays, with the increasing use of various types of fabrics in the garment industry, their resistance to bagging is of great importance with the aim of determining the effectiveness of textiles under various forces. The current paper investigated the effect of unde...

In order to extend the recycling of waterworks sludge to engineering applications, this paper addresses the influence of nano-SiO2 on incinerated waterworks sludge ash (IWSA) cement paste attacked by sulfate. Tests were performed such as length measurement for volume change, compressive strength, weight loss, and micro-structural testing using scanning electron microscopy (SEM). The results ind...

For optimum production of ultra-high performance concrete (UHPC), the material and microstructural properties of UHPC cured under various heat treatment (HT) conditions are studied. The effects of HT temperature and duration on the hydration reaction, microstructure, and mechanical properties of UHPC are investigated. Increasing HT temperature accelerates both cement hydration and pozzolanic re...

Reducing the consumption of cement with simultaneous utilizing waste materials as cement replacement is preferred for reasons of environmental protection. Blended cements consist of different supplementary cementitious materials (SCMs), such as fly ash, silica fume, Ground Granulated Blast Furnace Slag (GGBFS), natural pozzolans, etc. These materials should be chemically activated to show effec...

The overall production of the cement has greatly increased which results lots problems in environment as it involves emission CO2 gas. Environmental concerns, stemming from high energy expense and carbon dioxide associated with manufacture have brought about pressures to reduce consumption through use supplementary materials. Materials such Metakaolin, fly ash good pozzolanic activity are a mat...

In this study, waste ash was utilized as a pozzolanic material in blended Portland cement in order to reduce negative environmental effects and landfill volume required to dispose of waste ash. The influence of waste ash, namely palm oil fuel ash, rice husk ash and fly ash on compressive strength and sulfate resistance in mortar were studied and evaluated by some accelerated short-term techniqu...

The available literature identifies that the addition of mineral admixture as partial replacement of cement improves the microstructure of the concrete (i.e., porosity and pore size distribution) as well as increasing the mechanical characteristics such as drying shrinkage and creep, compressive strength, tensile strength, flexural strength, and modulus of elasticity; however, no single documen...

Concrete is probably the most extensively used construction material in the world. However, environmental concerns regarding rapid consumption of natural resources and CO2 emission during cement manufacturing process have brought pressure to reduce cement consumption by the use of cement replacement materials (CRMs). The utilization of calcined clay (metakaolin) and silica fume in concrete has ...