PURPOSE The present study was intended to evaluate the effect of soldering techniques with infrared ray and gas torch under different gap distances (0.3 mm and 0.5 mm) on the tensile strength and surface porosity formation in Ni-Cr base metal alloy. MATERIALS AND METHODS Thirty five dumbbell shaped Ni-Cr alloy specimens were prepared and assigned to 5 groups according to the soldering method ...

Mathematical models of compaction in sedimentary basins typically assume a relationship between effective pressure p• and porosity •, which is of a non-linear type; that is, p• = p•(d). However, at depths greater than a kilometer, pressure solution becomes important and this relationship approaches a viscous one. We derive a mathematical model for viscous compaction in sedimentary basins and sh...

We study the time and length scales of hydrodynamic dispersion in confined monodisperse sphere packings as a function of the conduit geometry. By a modified Jodrey-Tory algorithm, we generated packings at a bed porosity (interstitial void fraction) of ε=0.40 in conduits with circular, rectangular, or semicircular cross section of area 100πd(p)(2) (where d(p) is the sphere diameter) and dimensio...

Monolithic aerogels of high molecular weight polyethylene (Mw= 3x106- 6x106 g/mol) have been prepared by solvent extraction with supercritical carbon dioxide from thermoreversible gels prepared in decalin. These low density and highly porous aerogels present an apparent porosity up to 90%. The aerogel morphology observed by scanning electron microscopy (SEM) is characterized by spherulitic stru...

A water-table dependent reservoir model to investigate the effect of drought and vascular plant invasion on peatland hydrology. Author manuscript, published in "Journal of Hydrology (2013) 32 p." 2 ABSTRACT: This paper investigates the water table dynamics in a peatland showing a wide range of water table fluctuations. A reservoir model of water table fluctuations in a double-porosity peat is p...

monolithic aerogels of high molecular weight polyethylene (mw= 3x106- 6x106 g/mol) have been prepared by solvent extraction with supercritical carbon dioxide from thermoreversible gels prepared in decalin. these low density and highly porous aerogels present an apparent porosity up to 90%. the aerogel morphology observed by scanning electron microscopy (sem) is characterized by spherulitic stru...

Continuous-fiber-reinforced ceramic matrix composites (CMC) have been proposed as candidates for high-temperature applications. Their architecture and network of porosity have a strong effect on the mechanical behavior. X-ray tomography is a non-destructive technique that allows studying the volume mesostructure of these porous materials. The volume porosity, the open porosity fraction, the con...

Growth experiments have been carried out to characterize the occurrence and development of porosity in Bridgman and flux grown Al-Pd-Mn icosahedral quasicrystals. The porosity level has been observed to fluctuate between values of 0.0 and 3.75 percent along the length of Bridgman single crystals implying that the development of porosity is affected by the local growth conditions. Experiments we...

The acoustic properties of porous materials containing dead-end (DE) pores have been proposed by Dupont et al. [J. Appl. Phys. 110, 094903 (2011)]. In the theoretical description, two physical parameters were defined (the dead-end porosity and the average length of the dead-end pores). With the knowledge of the open porosity (measured with non-acoustic methods), and the measurement of kinematic...