A cotinine sensor based on the dc resistance of a polymer composite films is presented. The composite film comprises a cotinine selective molecularly imprinted polymer and carbon nanotube particles. This polymer film is deposited over a gold interdigitated electrode array to measure its electrical resistance. The electrical resistance of the imprinted polymer changes upon its selective binding ...

Solid polymer electrolytes have been prepared by solution casting technique. Carboxy methylcellulose (CMC)-ammonium nitrate (AN) films were studied with varied AN salt concentration from 5-50 wt.% at ambient temperature. X-ray diffraction (XRD) pattern shows the amorphous nature of polymer electrolyte samples. IR-spectra confirm the polymer-salt complexes in the range of 1633 829 cm -1 . Impeda...

Molecular-dynamics simulations were used to study the response of a nanometer thin polymer film to oscillatory shear. Several types of response occur, depending on the amplitude of the shear. At low amplitude, the film deforms elastically. At intermediate ones it deforms plastically. Short-range stress-induced structured crystalline domains occur. This flexible elastic state is very dynamic. Th...

A method has been developed allowing fabrication of electronic boards from flexible polymer film by ultrasonic embossing and welding within seconds. A commercially available ultrasonic welding machine and micro patterned tools from aluminum are employed first to generate conductor paths on a flexible polymer film, in a further step, surface mounted devices (SMDs) are assembled and fixed on the ...

With the demand for turbomachinery to operate at higher speeds, loads, and power, fluid film bearings that support turbomachinery must be capable of operating in these more demanding applications. Thrust bearings operating at high speeds and loads can experience high surface temperatures and thin fluid film thickness. Typically, babbitt (white metal) is the bearing lining material for most turb...

In this talk, we report a research work on fabrication and metallization of high aspect ratio polymer microstructures fabricated using UV lithography of SU-8 on silicon substrate. Electroless plating of metal film on both the top and sidewall surfaces of microstructures were achieved while the silicon substrate was not plated. The primary chemical mechanisms and possible applications were also ...

By using the depth selective imaging method, we studied the UV induced change in a photomobile liquid crystalline polymer film. With 1 μm depth resolution, each slice inside the film was selectively observed. A network-like structure mixed with the ordered and disordered regions of molecules in the middle of the film, and a rubbed polymer layer at the bottom of the film were observed. In each s...

Thin polymer films are ubiquitous in manufacturing and medical applications, and there has been intense interest in how film thickness and substrate interactions influence film dynamics. It is appreciated that a polymer-air interfacial layer with enhanced mobility plays an important role in the observed changes and recent studies suggest that the length scale ξ of this interfacial layer is rela...

We report a crack-free controlled wrinkling method based on a bilayer film system. A liquid UV-curable film is solidified on a uniaxially pre-stretched PDMS elastic sheet by UV-exposure. Subsequently, the sheet is released back to its initial non-stretched state, which results in spontaneous formation of grating wrinkles perpendicular to the stretching direction. An interface of gradient interp...

The drying process of polymer solutions coated on a flat substrate is very important in various industrial applications. We have proposed and modified a model of the drying process of a polymer solution coated on a flat substrate for uniform polymer film deposition. We used the model to control the thickness of a thin film after drying through management of the temperature, evaporation, and con...