This study examined the electrical and self-sensing capacities of ultra-high-performance fiber-reinforced concrete (UHPFRC) with and without carbon nanotubes (CNTs). For this, the effects of steel fiber content, orientation, and pore water content on the electrical and piezoresistive properties of UHPFRC without CNTs were first evaluated. Then, the effect of CNT content on the self-sensing capa...

An electroless plating of Co-Ni-P was applied to a grain-oriented electrical steel substrate resulting in a power loss improvement of approximately 9-11 %. The mean thickness of the coating was found to be 2.15±0.15 μm from Environmental Scanning Electron Microscope (ESEM) images. Shifts of the magnetostriction stress sensitivity curves showed that stress was acting on the substrate corroborate...

The effect of Co–P-CNT coating on the magnetic properties of grain oriented electrical steel was investigated. To analyse the coating, Raman spectroscopy, Superconducting QUantum Interference Device (SQUID), single strip testing, Scanning Electron Microscopy (SEM) and talysurf surface profilometry were performed. Raman spectra showed the D and G band which corroborates the presence of Multi-Wal...

Since its invention by Goss in 1934, grain-oriented (GO) electrical steel has been widely used as a core material in transformers. GO exhibits a grain size of over several millimeters attained by secondary recrystallization during high-temperature final batch annealing. In addition to the unusually large grain size, the crystal direction in the rolling direction is aligned with <001>, which is ...

A. Volodarskaja, V. Vodárek, J. Holešinský, VŠB Technical University of Ostrava, FMME, Ostrava, Czech Republic. Š. Miklušová, O. Žáček. ArcelorMittal Frýdek-Místek, Frýdek-Místek, Czech Republic The final Goss texture in grain-oriented electrical steels (GOES) is affected by microstructure evolution and inheritance during the whole production process. This paper presents the results of detailed...

In order to develop the high efficiency and low loss in transformer, it is essential reduce iron on grain-oriented electrical steel sheet which one of transformer loss. On other hand, known that increases due rotating magnetic flux generated at T-junction core, necessary deal with this problem. A vector characteristic control technology has been developed can under existing sheets. paper, we ap...

electrical steels are important alloys widely used in electrical instruments. the magnetic properties and low core loss of grain oriented silicon steels are closely related to the sharpness of goss texture ({110} ).the direction of is the softest direction for magnetism.  in this work, the microstructure and dependence of orientation density along the major texture fibers on the applied cold ro...

the application of conductive coatings on ferritic stainless steel can decrease electrical conductivity. theaim of this research was to investigate the electrical conductivity of cobalt coated aisi 430 ferritic stainlesssteel by pack cementation technique. coated coupons were analyzed using scanning electron microscopy(sem). electrical conductivity of the coated substrates was measured as a fun...