INTRODUCTION In this study, we intend to use diffuse optical Tomography (DOT) as a noninvasive, safe and low cost technique that can be considered as a functional imaging method and mention the importance of image reconstruction in accuracy and procession of image. One of the most important and fastest methods in image reconstruction is the boundary element method (BEM). This method is introduc...

We present a simple measurement and analysis technique to determine the fraction of optical loss due to both radiation (scattering) and linear absorption in microphotonic components. The method is generally applicable to optical materials in which both nonlinear and linear absorption are present and requires only limited knowledge of absolute optical power levels, material parameters, and the s...

A sol-gel technique under ultrasonic irradiation was applied to synthesize ZrO2/TiO2/ZnOnanocomposites. X-ray diffraction analysis confirmed the successful synthesis of nanocomposites. The strain and crystalline size values of ZrO2/TiO2/ZnO nanocomposites are estimated to be 9.98×10-4 and 17.66 nm, respectively. The linear absorption coefficient of ZrO2/TiO2/ZnO nanocomposites was measure...

The cavity resonant properties of planar metal-dielectric layered structures with optically dense dielectric media are studied with the aim of realizing omnidirectional and polarization-insensitive operation. The angle-dependent coupling between free-space and cavity modes are revealed to be a key leverage factor in realizing nearly perfect absorbers well-matched to a wide range of incidence an...

In this work we demonstrate optical trapping and manipulation of microparticles suspended in water due to laser-induced convection currents. Convection currents are generated due to laser light absorption in an hydrogenated amorphous silicon (a:Si-H) thin film. The particles are dragged towards the beam's center by the convection currents (Stokes drag force) allowing trapping with powers as low...

Two-dimensional quantitative images of the density of chlorine in a supersonic expansion are produced with an absolute accuracy of 5% in 150-microm pixels by using optical absorption tomography. An incoherent arc-lamp source provides ample ultraviolet radiation for high-resolution optical absorption tomographic measurements. A measurement of the chlorine absorption coefficient is reported.

We utilize quantum entangled photons to carry out nonlinear optical spectroscopy in organic molecules with an extremely small number of photons. For the first time, fluorescence is reported as a result of entangled photon absorption in organic nonlinear optical molecules. Selectivity of the entangled photon absorption process is also observed and a theoretical model of this process is provided....

Single-walled carbon nanotubes (SWNTs) are 1 dimensional (1D) tubular material with sp bonded graphene wall. Their unique geometry gives rise to sharp divergences in electronic density of states and consequently leads to characteristic discrete energy subbands. Since these inter-subband energy corresponds to near infrared (NIR) to visible (vis) range, many innovative optical application of SWNT...

We built a differential optical absorption spectroscopy system to measure near-surface CO2 absorption in the atmosphere using a nanosecond white light continuum. The white light laser can cover wavelengths ranging from 420 to 2400 nm, where the CO2 and H2O absorption lines are located. At an optical path length of 568 m, it was possible to evaluate atmospheric CO2 concentration from absorption ...

A simple analysis is performed for the absorption properties of graphene sandwiched between two media. For a proper choice of media and graphene doping/gating one can approach 50-100% absorption in the GHz-THz range for the one atom thick material. This absorption is controlled by a characteristic chemical potential which depends only on carrier life-time and the indexes of refraction of the di...