Biodegradable nanocomposite films were prepared by incorporation of cellulose nanofibrils (CNF) into alginate biopolymer using the solution casting method. The effects of CNF content (2.5, 5, 7.5, 10 and 15 wt %) on mechanical, biodegradability and swelling behavior of the nanocomposite films were determined. The results showed that the tensile modulus value of the nanocomposite films increased...

As, in the market, poly (lactic acid) (PLA) is the most used polymer as an alternative to conventional plastics, and as functionalized chitin nanocrystals (CHNC) can provide structural and bioactive properties, their combination sounds promising in the preparation of functional nanocomposite films for sustainable packaging. Chitin nanocrystals were successfully modified via acylation using anhy...

In order to clarify the controversies of hardening mechanism for TiN/SiNx-based nanocomposite films, the microstructure and hardness for TiN/SiNx and TiAlN/SiNx nanocomposite films with different Si content were studied. With the increase of Si content, the crystallization degree for two series of films firstly increases and then decreases. The microstructural observations suggest that when SiN...

Super-stretchable, skin-mountable, and ultra-soft strain sensors are presented by using carbon nanotube percolation network-silicone rubber nanocomposite thin films. The applicability of the strain sensors as epidermal electronic systems, in which mechanical compliance like human skin and high stretchability (ϵ > 100%) are required, has been explored. The sensitivity of the strain sensors can b...

Nanocomposite films of metal nitrides such as TiN/Si3N4, TiN/BN, and CrN/AlN have attracted substantial attention as coating materials for improving hardness and saving rare metals. It is difficult to prepare composite films consisting of nitride and oxide by conventional reactive sputtering methods. Nose et al. developed a differential pumping cosputtering (DPCS) system, which can fabricate di...

Mass transfer in nanocomposite hydrogel thin films consisting of alternating layers of an organometallic redox polymer (RP) and oxidoreductase enzymes was investigated. Multilayer nanostructures were fabricated on gold surfaces by the deposition of an anionic self-assembled monolayer of 11-mercaptoundecanoic acid, followed by the electrostatic binding of a cationic redox polymer, poly[vinylpyri...

In this paper, we propose strain-sensitive thin films based on chemically reduced graphene oxide (GO) and multi-walled carbon nanotubes (MWCNTs) without adding any further surfactants. In spite of the insulating properties of the thin-film-based GO due to the presence functional groups such as hydroxyl, epoxy, and carbonyl groups in its atomic structure, a significant enhancement of the film co...

Thin film metal oxide coatings have been used commercially as electromagnetic filters from the UV to infrared regions for over half a century. Deposition onto a substrate has typically been accomplished using vapor deposition techniques and more recently sol–gel methods. These coatings provide very good optical and mechanical performance when applied to substrates with similar thermal and mecha...

Polyvinylpyrrolidone  /  Nickel  oxide  (PVP/NiO)  dielectrics  were fabricated  with  sol-gel  method  using  0.2  g  of  PVP  at  different working  temperatures  of  80,  150  and  200  ºC.  Structural  properties and surface morphology of the hybrid films were investigated by X- Ray  diffraction  (XRD)  and  Scanning  Electron Microscope  (SEM) respectively. Energy dispersive X-ray spec...