In this paper, low voltage high gain up-conversion mixer, designed in 90nm CMOS technology, is proposed to work in the frequency band of 2.4 GHz. Current bleeding technique and current mirror topology are used in the upconversion mixer. Conversion Of an input of 100 MHz Given as intermediate frequency signal to an output of 2.4 GHz radio frequency signal is done by the proposed mixer with a loc...

The scaling of the CMOS technologies has a great impact on analog design. The most severe consequence is a reduction of the voltage supply. In this article, a new low-voltage folded-switching mixer with current-reuse, which operates at 1 V supply voltage, is discussed. The main advantages of the introduced mixer topology are: a high voltage gain, a low noise figure, an operation at low supply v...

We have applied an optimization method in conjunction with numerical simulations to minimize the mixing time of a microfluidic mixer developed for protein folding studies. The optimization method uses a semideterministic algorithm to find the global minimum of the mixing time by varying the mixer geometry and flow conditions. We describe the minimization problem and constraints and give a brief...

We describe a design for a sideband-separating balanced mixer using four planar single-ended mixer chips connected to the feed horn and LO source by a network of quadrature waveguide hybrids and an in-phase waveguide power divider. The mixer has separate IF output ports for the downconverted signals from the upper and lower RF sidebands, and requires ~14 dB less LO power than a single-ended mix...

We report on the design and performance of a 530-GHz balanced SIS mixer, the first balanced mixer in this frequency range. This quasi-optical balanced mixer utilizes a cross-slot antenna on a hyperhemispherical substrate lens with eight superconductor–insulator–superconductor (SIS) junctions and a 180 lumped element IF hybrid circuit. The local oscillator (LO) and the radio frequency (RF) signa...

The mapping approach is applied to study the distributive mixing in the, widely industrially used, Kenics static mixer. The flexibility of the mapping method makes it possible to study and compare thousands of different mixer layouts and perform optimization with respect to macroscopic homogenization efficiency and interface generation. In the paper two different designs of the mixer are invest...

The problem of separating Java code and HTML code in Servlet programming is not yet completely solved since the existing tentative solutions either are too complex or not complete. We present Mixer which is a novel helper tool based on a template engine design philosophy to solve this problem. Mixer is easy to learn and to use. Mixer is also computationally very efficient. We have already teste...

The complexity of wireless communication integrated circuits is increasing day by day due to the trend of multifunction and multistandard support. This has not only increased the production cost of these RFICs but the testing cost is also increased significantly, as much advanced test equipments and instruments are needed to carry out the sophisticated performance tests. To avoid this higher co...

This paper demonstrates the low voltage operation of a doubly balanced Gilbert mixer fabricated in a 0.8m CMOS process and operating as both a down-converter and an upconverter. As a down-converter with an RF input of 1.9 GHz, the mixer has a single sideband noise figure as low as 7.8 dB and achieved down-conversion gain for supply voltages as low as 1.8 V. As an up-converter, the mixer demonst...

We present the design of ALMA Band 5 sideband separation mixer based on Niobium superconducting SIS junctions and first experimental results for the double side band mixer. In this mixer the LO injection circuitry is integrated on the mixer substrate using a microstrip line directional coupler with slot-line branches in the ground plane. The isolated port of the LO coupler is terminated by a wi...