a new multiple c- slotted microstrip patch antenna is proposed.  a patch antenna is a wide-beam narrowband antenna. microstrip patch antenna consist of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. the patch can be designed in any possible shape and normally made by conducting material copper or gold. this paper presents design of a c- slotted ...

This article describes the design of single microstrip rectangular patch antenna and 1x1 microstrip rectangular patch antenna arrays operating at 2.4 GHz. Simulation result shows that 5.199 dB and 7.84 dB gain can achieved at frequency 2.4 GHz. Also simulation result show that the return loss is 18.809 at 2.360 GHz in 1x1 microstrip antenna array and current distribution and 3D radiation patter...

Abstract—A model for the two-dimensional analysis of microstrip lines, named Rigorously Coupled Multi-conductor Strip (RCMS) is introduced. In this model, the width of the strip of a microstrip line is subdivided into a large number of rigorously coupled narrow strips. So, a microstrip line can be considered as a coupled multi-conductor transmission line. Determination of the capacitance and in...

A single layer, single feed compact slotted patch antenna is thoroughly simulated in this paper. Resonant f requency has been reduced drastically by cutting three equal slots which are same hexagonal structure at the upper right, upper left and lower left corner from the conventional microstrip patch antenna. It is shown that the simulated results are in acceptable agreement. More importantly, ...

The aim of this investigation is to improve the performance of a basic microstrip antenna array using a tree structure patch supplied by electromagnetic coupling. The developed network which contains two subnets, a distribution subnet and a scanning subnet, is considered as a first step to design an adaptive microstrip antenna for UMTS use. The patch distribution structure used in this experime...

We present a new computer-aided modeling methodology to develop physicsbased models for passive components. We coherently integrate full-wave electromagnetic simulators, artificial neural networks, multivariable rational functions, dimensional analysis, and frequency mapping to establish broadband models. We consider both frequency-independent and frequency-dependent empirical models. Frequency...

A novel radio channel compensation method aiming to give optimal calibration for microstrip antenna array systems is presented in this paper, realized for an actual DOA measurement antenna system using microstrip antennas to sample the electromagnetic field, operating at 4.5GHz. This new approach considers mismatch between antennas and channel RF ports, channel transmission inequalities, and al...

Asymmetric-circular shaped slotted microstrip patch antennas with slits are proposed for circularly polarized(CP) radiation and radio frequency identification reader applications. A single-feed configuration based asymmetric-circular shaped slotted square microstrip patches are adopted to realize the compact circularly polarized microstrip antenna. The CP radiation can be achieved by slightly a...

In this paper describe the different feeding technique for wireless microstrip antenna, which are microstrip line feed, coaxial plane feed, proximity coupled feed and aperture couple feed. Microstrip line and coaxial probe feeds are contacting scheme, in which RF power directly to the radiating patch. Proximity and Aperture coupled feeds are non contacting schemes ,in which electromagnetic fiel...

A new microstrip ultra-wideband (UWB) bandpass filter (BPF) with triple-notched bands is presented in this paper. The circuit topology and its corresponding electrical parameters of the initial microstrip UWB BPF are desired by a variation of genetic algorithm (VGA). Then, triple-notched bands inside the UWB passband are implemented by coupling a square ring short stub loaded resonator (SRSSLR)...