نتایج جستجو برای: microcellular foam
تعداد نتایج: 15379 فیلتر نتایج به سال:
This investigation presents the effect of various parameters on foam stability and its rheological properties. The underlying idea of this experiment is generating of drilling foam with uniform bubbles. The main problem of foam using is controlling its stability during field application. The most important parameters which cause Instability in foam are gravity drainage, gas diffusion and bu...
The goal of this study was improvement of sandy soil using a combination of polystyrene foam container waste and Portland cement. For this purpose, Babolsar sand was used as the base soil. Strips of disposable polystyrene foam container waste in “chips” of 50 ´ 5 mm and 50 ´ 10 mm were added to the soil at 0.0%, 0.1%, 0.2% and 0.3% by weight along with 3% Portland cement at a relative density o...
abstract: this paper presents the results of studies concerned with the preparation of fresh food foams based on egg white and various hydrocolloids including iranian gum tragacanth, guar and xanthan gums at different concentrations (0.002-0.040% w/w). the basic physical parameters of the obtained foams such as overrun, stability and morphology of gas bubbles were measured. viscosity measuremen...
This report provides the baseline assumption related to environment, deployment, system design, and algorithms for the three test scenarios "base coverage urban", "microcellular", and "indoor" in which the WINNER system is exemplified and evaluated. Associated key assessment criteria are defined. Keyword list: baseline design, test scenarios, simulation assumptions, deployment, assessment criteria
The brass tubes with foam cores of AlSi7SiC3, AlSi7SiC3Fe1 and AlSi7SiC3Fe3 were produced as the crush-boxes with circle and square cross-section. Then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. The uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...
Foam injection is widely applied in amounts of fields to drilling, production, and formation protection. Sometimes, the application result is disappointing, which is caused by the failure of bubble generation in foam flooding. Therefore, it is necessary to seek ways for improving the performance of foam injection. An increased disturbance to the stratum, like the vibration caused by a seismic o...
milk-based espresso coffee is one of the most popular beverages. foam is an essential quality characteristic for this beverage. foam formation and stability is mainly related to the milk composition. in this study the influence of three different concentrations of xanthan gum (0.05, 0.1 and 0.2 g dm-3) and three different temperatures (50, 60 and 70 °c) on foam stability were examined and exper...
Wireless ATM networks can be implemented by adding mobility support functions to fixed ATM switches. This paper first describes a possible wireless ATM network and protocol architecture relying on “modular addition” of mobility support functions. This architecture sets a broad context where future WATM research can be conducted to elaborate on its various components. Within this context, this p...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید