A sulfhydryl-lignocellulose/montmorillonite (SLT) nanocomposite was prepared using a chemical intercalation reaction. The SLT nanocomposite was characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Transmission Electron Microscopy (TEM), the results demonstrated that an intercalated-exfoliated nanostructure was formed i...

Spent coffee grounds were evaluated for adsorption efficiency in the removal of pesticide paraquat from its aqueous solutions. The influence of the adsorbent mass, agitation time, paraquat concentration and pH have been investigated in the batch sorption mode. Adsorption capacity (mg/g) has been found to be 27.87 ± 1.57 mg/g, while the removal efficiency has resulted of 32.25 ± 1.79 %. Adsorpti...

This paper describes the preparation of new adsorbents derived from sugarcane bagasse and wood sawdust Manilkara sp. to remove zinc II ions from electroplating wastewater. The first part deals with the chemical modification of sugarcane bagasse and wood sawdust, using succinic anhydride to introduce carboxylic acid functions into the material. The obtained materials modified sugarcane bagasse M...

In our previous study, as natural food colorants and antioxidants, the color and content stabilities of Schisandra chinensis (S. chinensis) anthocyanins were investigated. In this work, the purification process parameters of S. chinensis anthocyanins using a macroporous resin and gel filtration chromatography were evaluated. The optimized parameters of static adsorption and desorption were as f...

The aim of this study was to evaluate the adsorption capacity of the novel coated activated carbon by chitosan for removal of Cr (VI) and Cd (II) ions from single and bi-solute dilute aqueous solutions. In addition, the adsorption abilities of activated carbon (AC), chitosan (CH) and chitosan / activated carbon composite (CHAC) have been compared. Adsorption studies were performed in a batch sy...

The metal-organic frameworks (MOFs) MIL-100(Fe), Cu-BTC and CPO-27(Ni) were synthesised in 1 kg batches. The materials were then formed in two different industrially relevant ways. Firstly, dry granulation was used to produce pellets which were sieved to give material with a 300-1000 μm size, and the fines were subsequently recycled to mimic a large scale industrial process. Secondly, wet granu...

A thiol-functionalized magnetite/graphene oxide (MGO) hybrid as an adsorbent of Hg2+ was successfully synthesized by a two-step reaction. It exhibited a higher adsorption capacity compared to the bare graphene oxide and MGO due to the combined adsorption of thiol groups and magnetite nanocrystals. Its capacity reached 289.9 mg g-1 in a solution with an initial Hg2+ concentration of 100 mg l-1. ...

The as-grown CNTs and graphitized CNTs were used as adsorbents to remove 1,2-dichlorobenzene from water. The experiments demonstrate that it takes only 40 min for CNTs to attain equilibrium and the adsorption capacity of asgrown and graphitized CNTs is 30.8 and 28.7 mg/g, respectively, from a 20 mg/l solution. CNTs can be used as adsorbents in a wide pH range of 3–10. Thermodynamic calculations...

This research aims to investigate the possibility of electrospun fibers from Polymers of Intrinsic Microporosity (PIM-1) as an alternative adsorbent for aniline removal from both air and aqueous solution. Adsorption properties of electrospun PIM-1 fibers were compared with powder and film form of PIM-1. While electrospun PIM-1 nanofibrous mat can adsorb 871 mg g-1 aniline from air, it can also ...

The study was carried out on the sorption of heavy metals (Ni2+, Cu2+, Pb2+, and Cd2+) under static conditions from single- and multicomponent aqueous solutions by raw and pretreated clinoptilolite. The sorption has an ion-exchange nature and consists of three stages, i.e., the adsorption on the surface of microcrystals, the inversion stage, and the moderate adsorption in the interior of the mi...