the main objective of this study was to produce ldpe active films containing metallic nanoparticles (ag, zno and cuo) and to investigate their physical, mechanical and anti-microbial characteristics. three types of metallic nanoparticles at concentrations of 1% (w/w) were added to low density polyethylene (ldpe) and the films were prepared using melt extrusion technique. sem results indicated r...

pyrolysis of low density polyethylene (ldpe) by equilibrium fluid catalytic cracking (fcc) was studied in a stirred reactor under different process parameters. in this work, the effect of process parameters such as degradation temperature (420-510°c), catalyst/polymer ratio (0-60%), carrier gas type (h2, n2, ethylene, propylene, ar and he), residence time and agitator speed (0-300 rpm) on the c...

Lignin, a byproduct of paper and pulp industries, is a sustainable, inexpensive biomaterial with potential as composite filler. Past research on polyolefin/lignin composites made by melt processing has led to modest increases in Young’s modulus and drastic reductions in tensile strength and elongation at break relative to neat polymer. Here, green hybrids of low density polyethylene (LDPE) and ...

Degradation of Petroleum-plastics like Low Density Polyethylene (LDPE) is a budding challenge due to increasing white pollution. The present investigation has focused the aspect through microbial assisted biodegradation. Various indigenous microorganisms were isolated from collected municipal landfill soil. Growth medium enriched with 0.2 g of LDPE powder was used to screen the soil bacteria wi...

The biodegradation of spent saline bottles, a low density polyethylene product (LDPE) by two selected Arthrobacter sp. under in vitro conditions is reported. Chemical and UV pretreatment play a vital role in enhancing the rate of biodegradation. Treated LDPE film exhibits a higher weight loss and density when compared to untreated films. Arthrobacter oxydans and Arthrobacter globiformis grew be...

The low-density polyethylene/aluminum (LDPE/Al) joint in Tetra Pak provides stability and strength to food packaging, ensures protection against outside moisture, maintains the nutritional values flavors of without need for additives products. However, a poor adhesion LDPE Al, due its non-polar surface, is limiting factor extra polymeric interlayers or surface treatment required. Plasma-assiste...

A proposed mechanism of white discoloration development on peeled carrots included both physical and physiological responses to wounding. The physical response is a color change due to reversible surface dehydration. This study was performed at 2.5 and 10°C using a mode1 system controlling relative humidity, at 33, 75 or 98%, and a commercial system with low-density polyethylene (LDPE) plastic ...

Polymer-modified bitumen is used to combat different pavement distresses and to increase the life span of pavement. Unmodified bitumen cannot perform better with the range extreme minimum and maximum pavement temperatures. The polymers commonly used to modify the bitumen are ethylene vinyl acetate (EVA) styrene butadiene styrene (SBS). The aim this study to compare the performance of EVA modifi...

Low-density polyethylene (LDPE) films cografted with vinylene carbonate (VCA) and Nvinyl-N-methylacetamide (VIMA) were studied as a matrix for the immobilization of the enzyme alkaline phosphatase (ALP) either by direct fixation or by inserting spacers. When water-soluble alkyldiamines such as diaminoethylene, diaminobutane, diethylenetriamine, and diaminohexane were used as spacers between the...