This paper deals with the possibility of reducing carbon content by heat treatment in reactive atmospheres in order to improve plastic deformations properties of steel sheets. The heat treatment involves a decarburation annealing after a cold rolling, as opposed to the traditional process that performs the heat treatment in non-reactive atmospheres. Some of the most relevant variables were stud...

Exposure tests were performed on low alloy steels in high Cl- and high SOx environment, and the structure of the rust were analyzed by TEM (Transmission Electron Microscopy) and Raman Spectroscopy. In the exposure test site, the concentrations of Cl- and SOx were found to be high, which caused the corrosion of the steels. The conventional weathering steel (SMA: 0.6% Cr-0.4% Cu-Fe) showed higher...

The current oscillatory behavior of epoxy-coated low carbon steel at anodic polarization was investigated in 3,5 % and 0,5 % solutions of NaCl. It was established, that the coated steel may show current oscillations at potentiostatic anodic polarization. The oscillations are of different type, period and amplitude and are more clearly expressed in 0,5 % solution. The presented results might be ...

It has been clarified that deformation and annealing of martensite starting structure can produce ultrafine-grained structure in low carbon steel.  This study aims to investigate the texture evolution and mechanical properties of samples with martensite structure deformed by two different forging processes. The martensitic steel samples were forged by plane strain compression and multi-directio...

A combination of neural networks and genetic algorithms has been used to design a TRIP assisted steel in which the silicon concentration is kept low. In this context, the steel has a novel microstructure consisting of d ferrite dendrites and a residual phase which at high temperatures is austenite. This austenite can, with appropriate heat treatment, evolve into a mixture of bainitic ferrite an...

S. Rešković, I. Jandrlić, University of Zagreb, Faculty of Metallurgy, Sisak, Croatia, F. Vodopivec Institute of Metals and Technology, Ljubljana, Slovenia Using thermal imaging camera during tensile testing of low carbon and Nb microalloyed steel influence of testing rate on start of plastic deformation was investigated. The results showed that the onset of plastic flow is significantly differ...

Original scientific paper In this paper, influence of flame spraying and fusing on microstructure of substrates made from heat treated carbon steel C45, a heat treated low alloyed 42CrMo4 steel and stainless austenitic steel X6CrNiMo18-10-2, has been investigated. Flame spraying and fusing is a deposition technique commonly applied to nickel-base self-fluxing alloys (NiCrBSi alloys). Because of...