We report on fabrication of tubular optical waveguides buried in ZBLAN glass based on transverse femtosecond laser direct writing. Irradiation in ZBLAN with focused femtosecond laser pulses leads to decrease of refractive index in the modified region. Tubular optical waveguides of variable mode areas are fabricated by forming the four sides of the cladding with slit-shaped femtosecond laser pul...

Copper alloys, combined with selective laser melting (SLM) technology, have attracted increasing attention in aerospace engineering, automobile, and medical fields. However, there are some difficulties in SLM forming owing to low laser absorption and excellent thermal conductivity. It is, therefore, necessary to explore a copper alloy in SLM. In this research, manufacturing feasibility and form...

Laser forming of sheet metal offers the advantages of requiring no hard tooling and thus reduced cost and increased flexibility. It also enables forming of some materials and shapes that are not possible now. In single-axis laser bending of plates, the bending edge is found to be somewhat curved and the bending angle varies along the laser-scanning path. These phenomena are termed edge effects,...

Controlled fabrication of single and multiple nanostructures far below the diffraction limit using a method based on laser induced periodic surface structure (LIPSS) is presented. In typical LIPSS, multiple lines with a certain spatial periodicity, but often not well-aligned, were produced. In this work, well-controlled and aligned nanowires and nanogrooves with widths as small as 40 nm and 60 ...

In laser forming, phase transformations in the heated affected zone (HAZ) take place under steep thermal cycles, and have a significant effect on the flow behavior of Ti-6Al-4V alloy and the laser forming process. In the present work, the transformation during heating is modeled based on the Johnson-Mehl-Avrami (JMA) theory, and the decomposition of phase, producing martensite ' or lamellae dep...