−− The adsorption process of Nickel and Vanadium dissolved in acid liquor on lignin is studied in this work. Different adsorption isotherm models are used to adjust liquid-solid systems: Langmuir, Freundlich and Redlich-Peterson. It was obtained that the metal adsorption using lignin proceeds by similar chemical mechanisms. Possibly the Nickel is adsorbed in heterogeneous monolayers, contrary t...

In order to investigate the effect of linearized process on the adsorption equilibrium isotherms of methylene blue from solutions onto rice husk, the experimental data were fitted to the Langmuir isotherm equations by using five different types of linear expression. The adsorption equilibrium constant related to the affinity of the binding sites and energy of adsorption (KL ) and maximum adsorp...

In this study, adsorption of copper from aqueous solutions was investigated using mangrove biomass from the Kenyan Coast. The efficacy of mangrove biomass on the removal of copper (II) ions from aqueous solutions was investigated in single state in batch mode with respect to effects of initial pH, temperature, initial concentration of the metal ion, adsorbent dosage and contact time on metal io...

The magnetic NiFe2O4 nanoparticles have been synthesized and used as adsorbents for removal of an azo dye, Eriochrome black-T (EBT) from aqueous solution. The NiFe2O4 nanoparticles were characterized by scanning electron microscope (SEM), Transmission electron microscope (TEM), X-ray diffraction (XRD) and Fourier transform infrared spectra (FTIR). The adsorption studies were carried out under v...

The aim of this research was to investigate the potential of raw and iron oxide impregnated carbon nanotubes (CNTs) as adsorbents for the removal of selenium (Se) ions from wastewater. The original and modified CNTs with different loadings of Fe2O3 nanoparticles were characterized using high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), X-ray diffracto...

The ability of cynodon dactylon based thermally activated carbon to remove fluoride from aqueous solution has been investigated. The batch adsorption studies were carried out at neutral pH as the functions of contact time, adsorbent dose, adsorbate concentration, temperature and effect of co-anions, which are commonly present in water. The rate of adsorption was rapid during initial 105 minutes...

Adsorption removal of Cu(II) and Cd(II) from aqueous solution using low-cost banana peels (a food waste) and bentonite clay (natural resource), was investigated. The adsorption process was studied in a batch scale at mean operation parameter which were pH, adsorbent particle size, adsorbents dosages, and initial concentrations of metal ions. All experiments were conducted at room temperature. L...

In the present study, activated carbons of Eichornea crasssipes(EC), Sugarcane bagassae(SB), Tea waste(TW) and Guava leaf(GL) were prepared from agricultural wastes and used as an adsorbents for the removal of Acid Blue 92 (AB92) dye from aqueous solution. The effects of pH, adsorbent dosage, initial dye concentration and contact time on the extent removal of AB92 has been studied by Batch adso...

This paper describes the adsorption of two organic (acetic and citric) acids on the blast furnace sludge, a representative by-product of the steelmaking industry. By PIXE, XRD, BET and SEM methods, it was shown that blast furnace sludge is a complex heterogeneous material with a specific surface area of s = 31.46 m g, composed mainly of amorphous phase (w = 76.2 %), calcite (w = 9.9 %), magneti...

Rice straw/magnetic nanocomposites (RS/Fe3O4-NCs) were prepared via co-precipitation method for removal of Pb(II) and Cu(II) from aqueous solutions. Response surface methodology (RSM) was utilized to find the optimum conditions for removal of ions. The effects of three independent variables including initial ion concentration, removal time, and adsorbent dosage were investigated on the maximum ...