The purpose of the study is to investigate average and local surface heat transfer coefficients in a cylinder packed with spheres. Here the term «local» applies to a single sphere within the bed. Averages are derived from the sixteen different spheres that were instrumented and distributed throughout the bed. The experimental technique consisted of introducing a step - wise change in the temper...

A numerical study has been conducted to investigate the influence of fin pitch and relative humidity on the heat transfer performance of the fin-and-tube heat exchangers having plain fin geometry under dehumidifying conditions. The analysis is done using the ratio between the heat transfer coefficients in totally wet conditions and those in totally dry conditions using the appropriate correlati...

In this paper, we present an experimental investigation of pool boiling heat transfer on multiscale (micro/ nano) functionalized metallic surfaces. Heat transfer enhancement in metallic surfaces is very important for large scale high heat flux applications like in the nuclear power industry. The multiscale structures were fabricated via a femtosecond laser surface process (FLSP) technique, whic...

Nucleate boiling heat transfer coefficients may be strongly reduced by scale formation, even for conditions where the bulk foulant concentration is well below the saturation concentration. Due to the mechanism of micro-layer evaporation, the local concentration at the heat transfer surface can be considerably increased, causing the formation of scale and changes in bubble frequency and bubble d...

Enhancing condensation heat transfer is important for broad applications from power generation to water harvesting systems. Significant efforts have focused on easy removal of the condensate, yet the other desired properties of low contact angles and high nucleation densities for high heat transfer performance have been typically neglected. In this work, we demonstrate immersion condensation on...

the present study investigated the effect of distilled-water/ silver nanofluid on heat transfer in a closed cooling system of one of the electrical energy generation units at isfahan power plant. the difference between this study and previous researches refers to silver properties which have a high thermal conductivity and is non-toxic, hydrophilic and eco-friendly. distilled water/ silver nano...

In this paper theoretical estimations of boundary layer thickness and heat transfer coefficient is examined using Computational Fluid Dynamics (CFD) for laminar air flow. The feasibility and accuracy of using CFD to calculate convective heat transfer coefficients is examined. A grid sensitivity analysis is performed for the CFD solutions, and it is used to determine the convective heat transfer...

k This study investigated the Navier-Stokes L computations of the surface heat transfer coefficients of a transition duct flow. A transition duct from an axisymmetric n cross section to a nonaxisymmetric cross section, is usually used to connect the turbine exit to the nozzle. As the gas Pr turbine inlet temperature increases, the transition duct is subjected to the high temperature at the gas ...

This study commences by performing an experimental investigation to measure the temperature distribution within a casting system comprising a cylindrical aluminum casting and a green-sand mold. The experimental temperature measurements are then used to compute the effective heat transfer coefficient at the mold/metal interface using four different formulae. In the temperature measurement, a sym...