This research investigates the possibility of using high-density polyethylene (HDPE) plastic waste to improve properties asphalt concrete pavement. HDPE contents 1, 3, 5, and 7% by aggregate weight were used. waste=stabilized pavement (HDPE-ACP) was evaluated performance testing for stability, indirect tensile strength, resilient modulus (MR), fatigue (ITF). In addition, microstructure, age, CO...

Fretting fatigue process have many features such as early stage crack initiation at contact edge, very slow crack propagation and fatigue failure after very long life operation. In this paper at first we present fretting fatigue model in high cycle region, which is considering the wear process near contact edge. And then we present fretting fatigue life estimation method in low cycle fatigue re...

The aim of this study is to evaluate the microstructures, tensile lap shear strength, and fatigue resistance of 6022-T43 aluminum alloy joints welded via a solid-state welding technique-ultrasonic spot welding (USW)-at different energy levels. An ultra-fine necklace-like equiaxed grain structure is observed along the weld line due to the occurrence of dynamic crystallization, with smaller grain...

A review chapter 1 summarized the techniques and procedures for measuring the mechanical properties of freestanding films as of the end of 2000. Test methods can be characterized as direct or indirect. In the former, the property of interest is measured independently, e.g. Young’s modulus from separate measurements of force, area, and strain on a tensile specimen. In the latter, a model of the ...

In this paper, the fatigue damage and lifetime of 2D SiC/SiC ceramic-matrix composites (CMCs) under cyclic fatigue loading at 750, 1000, 1100, 1200 and 1300 °C in air and in steam atmosphere have been investigated. The damage evolution versus applied cycles of 2D SiC/SiC composites were analyzed using fatigue hysteresis dissipated energy, fatigue hysteresis modulus, fatigue peak strain and inte...

In this work, the effects of carbon content and manganese sulfide addition on the microstructure and mechanical properties of copper steel parts have been studied. Steel powder mixture containing 2%Cu and different graphite contents with and without MnS additions were compacted, sintered and forged to almost full density. Forged samples, with near theoretical densities, were tested for tensile,...

Road networks are major infrastructures that support the economic development in both developed and developing countries. Bottom ash (BA) is a by-product from coal-fired powerplants, which composed of lipophilic molecule with effective reactivity to bituminous binder. BA was adopted this research, as green fine aggregate, improve mechanistic performance asphalt concretes research. The effect BA...

The role of foreign-object damage (FOD) and its effect on high-cycle fatigue (HGF) failures in a turbine engine Ti– 6Al–4V alloy is examined in the context of the use of the Kitagawa–Takahashi diagram to describe the limiting conditions for such failures. Experimentally, FOD is simulated by firing 1 and 3.2 mm diameter steel spheres onto the flat specimen surface of tensile fatigue specimens at...

Flexural fatigue tests are typically run under displacement or in a straincontrolled mode. In these tests, either the oscillatory displacement amplitude or strain amplitude applied to the bottom of the specimen is kept constant. The evolution of loading required to cause fatigue is then measured. Load amplitude decreases with the number of cycles, and the specimen is considered to have failed w...

considering the fact that rocks fail faster under tensile stress, rock tensile strength is of greatimportance in applications such as blasting, rock fragmentation, slope stability, hydraulic fracturing,caprock integrity, and geothermal energy extraction. there are two direct and indirect methods tomeasure tensile strength. since direct methods always encompass difficulties in test setup, indire...