We present an unsupervised deep neural network approach to the fusion of RGB-D imagery with inertial measurements for absolute trajectory estimation. Our network, dubbed the Visual-Inertial-Odometry Learner (VIOLearner), learns to perform visual-inertial odometry (VIO) without inertial measurement unit (IMU) intrinsic parameters (corresponding to gyroscope and accelerometer bias or white noise)...

The initial alignment is vital to the strapdown inertial navigation system (SINS). In this work, an efficient initial alignment method for SINS based on a six-degree of freedom inertial measurements unit (IMU) is proposed. The three dimensional linear accelerations and angular rates are acquired from a data acquisition board which contains a low-cost IMU. Preprocess the gyro data and modeling t...

Recently another MITE-like structure, called the integron mobilization unit (IMU), has been described flanking a defective class 1 integron harbouring a carbapenem resistance gene, blaGES-5, in a clinical Enterobacter cloacae strain. Although the IMU sequence is not related to the MITE reported in our study, IMU-based mobilization of the integron could be demonstrated using a transposase provid...

The aim of this article is to develop a GPS/IMU Multisensor fusion algorithm, taking context into consideration. Contextual variables are introduced to define fuzzy validity domains of each sensor. The algorithm increases the reliability of the position information. A simulation of this algorithm is then made by fusing GPS and IMU data coming from real tests on a land vehicle. Bad data delivere...

Based on a small, lightweight, low-cost high performance inertial Measurement Units(IMU), an effective calibration method is implemented to evaluate the performance of Micro-Electro-Mechanical Systems(MEMS) sensors suffering from various errors to get acceptable navigation results. A prototype development board based on FPGA, dual core processor’s configuration for INS/GPS integrated navigation...

Pose estimation purely based on 3D point-cloud could suffer from degradation, e.g. scan blocks or scans in repetitive environments. To deal with this problem, we propose an approach for fusing 3D spinning LiDAR and IMU to estimate the ego-motion of the sensor body. The main idea of our work is to optimize the poses and states of two kinds of sensors with non-linear optimization methods. On the ...

Visual-Inertial Odometry (VIO) utilizes an Inertial Measurement Unit (IMU) to overcome the limitations of Visual Odometry (VO). However, the VIO for vehicles in large-scale outdoor environments still has some difficulties in estimating forward motion with distant features. To solve these difficulties, we propose a robust VIO method based on the analysis of feature confidence in forward motion e...

This research aims at enhancing the accuracy of navigation systems by integrating GPS and Micro-ElectroMechanical-System (MEMS) based inertial measurement units (IMU). Because of the conditions required by the large number of restrictions on empirical data, a conventional Extended Kalman Filtering (EKF) is limited to apply in navigation systems by integrating MEMS-IMU/GPS. In response to non-li...

Low-cost MEMS-based IMUs, video cameras and portable GNSS devices are commercially available for automotive applications and some manufacturers have already integrated such facilities into their vehicle systems. GNSS provides positioning, navigation and timing solutions to users worldwide. However, signal attenuation, reflections or blockages may give rise to positioning difficulties. As oppose...

OBJECTIVE To correctly measure the knee joint angle, this study utilized a Qualisys motion capture system and also used it as the reference to assess the validity of the study's Inertial Measurement Unit (IMU) system that consisted of four IMU sensors and the Knee Angle Recorder software. The validity was evaluated by the root mean square (RMS) of different angles and the intraclass correlation...