BACKGROUND Determination of the amount of wear in a polyethylene liner following total hip arthroplasty (THA) is important for both the clinical care of individual patients and the development of new types of liners. PATIENTS AND METHODS We measured in vivo wear of the polyethylene liner using computed tomography (CT) (obtained in the course of regular clinical care) and compared it to coordi...

The effects of surface texture on the lubrication performance of a compression ring-cylinder liner system are studied in this paper. By considering the surface roughness of the compression ring and cylinder liner, a mixed lubrication model is presented to investigate the tribological behaviors of a barrel-shaped compression ring-cylinder liner system with spherical dimples on the liner. In orde...

PURPOSE The purpose of this study was to investigate the bonding properties of denture bases to silicone-based soft denture liners immersed in isobutyl methacrylate (iBMA) and 2-hydroxyethyl methacrylate (HEMA) for various lengths of time. MATERIALS AND METHODS Polymethyl methacrylate (PMMA) test specimens were fabricated (75 mm in length, 12 mm in diameter at the thickest section, and 7 mm a...

Cone crushers are used in the aggregates and mining industries to crush rock material. The pressure on cone crusher liners is the key factor that influences the hydraulic pressure, power draw and liner wear. In order to dynamically analyze and calculate cone crusher performance along with liner wear, a series of experiments are performed to obtain the crushed rock material samples from a crushi...

BACKGROUND Good suspension lessens the pistoning (vertical displacement) of the residual limb inside the prosthetic socket. Several methods are used for measuring the pistoning. STUDY DESIGN Clinical trial. OBJECTIVES To introduce and evaluate a new simple method for measuring the pistoning between the soft liner and socket in transtibial prostheses. METHODS Five transtibial prostheses wi...

Aim. To compare the microleakage in class II composite restorations without a liner/with resin modified glass ionomer and flowable composite liner. Method. Forty standardized MO cavities were prepared on human permanent mandibular molars extracted for periodontal reasons and then divided into 4 groups of ten specimens. The cavity preparations were etched, rinsed, blot dried, and light cured and...

This study was performed to evaluate the effect of a lithium-disilicate spray-liner application on both the bond strength between zirconia cores and heat-pressed lithium-disilicate glass-ceramic veneers, and the fracture strength of all-ceramic zirconia crowns. A lithium-disilicate reinforced liner was applied on the surface of a zirconia core and lithium-disilicate glass-ceramic was veneered o...

An experimental investigation of the acoustical behaviour of a liner in a rectangular channel with grazing flow has been conducted. The liner consists of a ceramic structure of parallel square channels: 1mm by 1 mm in cross section, 65 mm in length, and a surface density of 400 channels/inch square. The channels are rigidly terminated, thus constituting a locally reacting structure. In the abse...