Basing on results of previous studies, the efficiency of a Brayton/Hirn combined cycle, fuelled with a clean syngas produced by means of biomass gasification and equipped with CO2 removal by chemical absorption, resulted 33.94%, considering also the separated CO2 compression process. The specific CO2 emission of the power plant was 178 kg/MWh. In comparison with values previously found for an I...

The electricity generation sector needs to reduce its environmental impact and dependence on fossil fuel, mainly from coal. Biomass is one of the most promising future options to produce electricity, given its potential contribution to climate change mitigation. Even though biomass is an old source of energy, it is not yet a well-established commodity. The use of biomass in large centralised sy...

A detailed thermo-economic model considering different technological alternatives for thermochemical production of Synthetic Natural Gas (SNG) from lignocellulosic biomass is presented. First, candidate technology for processes based on biomass gasification and subsequent methanation is discussed and assembled in a general superstructure. Both energetic and economic models for biomass drying wi...

This book contains the successful invited submissions [1–15] to a Special Issue of Energies on the subject area of “Biomass Chars: Elaboration, Characterization, and Applications”. The invited editors have decided to focus the Special Issue on the specific topic of biomass transformation and use. In fact, biomass can be converted to energy, biofuels, and bioproducts, via thermochemical conversi...

Recently, a growing interest has emerged on the development of new and efficient energy sources, due to the inevitable extinction of the nonrenewable energy reserves. One of these alternative sources which have a great potential and sustainability to meet up the energy demand is biomass energy. This significant energy source can be utilized with various energy conversion technologies, one of wh...

Magnesium nickel silicate (MNS) has been investigated as a catalyst to convert tars and light hydrocarbons to syngas (CO and H2) by steam reforming and CO2 reforming in the presence of H2S for biomass gasification process at NexTech Materials. It was observed that complete CH4 conversion could be achieved on MNS catalyst granules at 800–900 °C and a space velocity of 24,000 mL/g/h in a simulate...

The use of gas fermentation for the production of low carbon biofuels such as ethanol or butanol from lignocellulosic biomass is an area currently undergoing intensive research and development, with the first commercial units expected to commence operation in the near future. In this process, biomass is first converted into carbon monoxide (CO) and hydrogen (H2)-rich synthesis gas (syngas) via ...

Biomass wastes produced from oil palm mills and plantations include empty fruit bunches (EFBs), shells, fibers, trunks, and oil palm fronds (OPF). EFBs and shells are partially utilized as boiler fuel while the rest of the biomass materials like OPF have not been utilized for energy generation. No previous study has been reported on gasification of oil palm fronds (OPF) biomass for the producti...

In this study, thermochemical biomass gasification was performed on a bench-scale fluidized-bed gasifier with steam and air as fluidizing and oxidizing agents. Distillers grains, a non-fermentable byproduct of ethanol production, were used as the biomass feedstock for the gasification. The goal was to investigate the effects of furnace temperature, steam to biomass ratio and equivalence ratio o...

Hydrogen production has gained increasing attention as a potential energy carrier, which can utilize many forms of renewable energy, such as biomass, wind and direct solar power. It has increased its significance as fossil fuels are being used up at a high rate and energy security is of greater importance to the United States and many other countries. Furthermore, hydrogen production offers the...