Single-shaft gas turbine and its cycles are sensitive to frequency drops and, therefore, sudden change loads or large frequency dips might affect their stability. This phenomenon is related to the reduction of the air mass flow passing through the machine during the frequency dips, which might lead to an interaction between governor and temperature control loop. In this paper, the performance o...

Extensive use of pressurized steam in the oil and gas sectors has led to incidents where workers were seriously injured. In this study a test device and procedure to measure heat transfer through fabrics during steam exposure were developed and evaluated. Several factors were considered while designing the test device to simulate work site conditions. Fabrics were exposed to steam at 2 distance...

Nickel/doped-ceria composites are promising electrocatalysts for solid-oxide fuel and electrolysis cells. Very often steam is present in the feedstock of the cells, frequently mixed with other gases, such as hydrogen or CO2 . An increase in the steam concentration in the feed mixture is considered accountable for the electrode oxidation and the deactivation of the device. However, direct experi...

The exergy analysis is a proper method for performance evaluation of industrial systems. A generic and detailed analysis of the GPCSs on the second gas pipeline of Iran  is made by the means of exergy. The two main improvement measures of fuel pre-heating and steam injection technologies are presented for the current conventional stations. Steady state equations regarding the second law of ther...

The gas evolution, mass decay behavior and energy content of several woods, grasses, and agricultural residues were examined with steam and CO(2) gasification using thermogravimetric analysis and gas chromatography. CO(2) concentrations were varied between 0 and 100% with steam as a coreactant. Carbon conversion was complete with 25% CO(2)/75% steam compared to 90% conversion with pure steam in...

Introduction Reforming (i.e., partial oxidation, steam reforming, or autothermal reforming (ATR)) of infrastructure fuels, such as natural gas, liquefied petroleum gas, gasoline, or diesel, is one approach being investigated for distributed H2 production for use with fuel cell systems being developed for automotive and stationary applications. One area of interest is reforming gasoline either o...

The influence of catalyst support alumina-silica in terms of different Al2O3 to SiO2 mole ratios containing 20 wt.% Ni on the production of hydrogen and catalyst coke formation from the pyrolysis-catalysis of waste tyres is reported. A two-stage reactor system was used with pyrolysis of the tyres followed by catalytic reaction. There was only a small difference in the total gas yield and hydrog...

Ultra-thin, high performance composite palladium membrane, developed via a novel electroless plating method, was applied to construct a membrane reactor for methane steam reforming reaction, which was investigated under the following working conditions: temperature 723–823 K, pressure 300–900 kPa, gas hourly space velocity (GHSV) 4000–8000 mL g 1 cat h , steam-to-carbon feed ratio (S/C, mol/mol...

Eryngium caucasicum Trautv. (Apiaceae) is a perennial herbaceous plant with about one meter height, an endemic species that has been distributed in the northern parts of Iran. The plant leaves are normally used in medicine and food industries in Iran.The plant has several medicinal properties including enforcing generative power, diuretic, lenitive and appetizer. In this research differents par...