The competition between transverse surface and sub-surface cracks in a thin, hard coating bonded to polycarbonate substrate due to spherical indentation is investigated in real-time as a function of coating thickness and indenter radius. Fine grain (Y-TZP) and medium grain (alumina) ceramics and pre-abraded amorphous glass are used for the coating. As the coating thickness is reduced, the famil...

OBJECTIVES To assess the effect of interfacial surface roughness on the flexure strength and fracture mode and origin utilizing an in-vitro assessment of the clinical failure conditions expected for all-ceramic crowns and the connector area of fixed partial dentures (FPDs) using bilayered ceramic specimens tested in bi-axial flexure. METHODS Sets of 20 bilayered composite discs, with core:den...

Conventional material removal of BK7 optical glass will normally result in brittle fracture at the surface, generating severe subsurface damage and poor surface finish. Subsurface damages induced by grinding strongly influence the mechanical strength and optical quality of optical glasses. However, through ductile mode grinding it is possible to reduce the surface and subsurface cracks. It is m...

Conventional material removal of BK7 optical glass will normally result in brittle fracture at the surface, generating severe subsurface damage and poor surface finish. Subsurface damages induced by grinding strongly influence the mechanical strength and optical quality of optical glasses. However, through ductile mode grinding it is possible to reduce the surface and subsurface cracks. It is m...

. AbstrAct Objective. In clinical practice, core material can be exposed after adjustments, which may result in loss of ceramic glaze. The objective of this study is to evaluate the effect of surface roughness on the flexural strength and fracture toughness of In-Ceram zirconia core material. Materials and methods. Forty In-Ceram zirconia specimens were prepared and divided into two main groups...

Indentation cracks on ceramics are frequently used not only for the semi-empirical determination of the fracture toughness KIC but also as a method for generating semielliptical surface cracks to be used in as starting cracks in fracture and fatigue studies. Tetragonal zirconia stabilized with 3 % mol of yttria (3Y-TZP) is a biocompatible ceramic with good mechanical properties which is used in...

BACKGROUND The fracture of acrylic resin denture is rather common occurrence and causes inconvenience to the patients. This study was carried out to evaluate and compare the impact strength and fracture morphology of four different heat cure acrylic materials. MATERIALS AND METHODS Acrylic resin specimens were prepared using preformed metal die of dimension 65 × 10 × 3 mm. The specimens were ...

Experiments in brittle, amorphous PMMA indicate that the process of dynamic fracture is governed by a micro-branching instability. At a critical velocity, vc, a single crack undergoes an abrupt, well-defined transition to microscopic crack branching. As a result, the velocity of the crack develops oscillations, the mean acceleration decreases and structure is formed on the fracture surface. Bey...

Treatment of posterolateral tibial plateau fractures is controversial, and information regarding this specific fracture pattern is lacking. The purpose of this study was to elucidate the frequency and morphological features of posterolateral articular fragments in tibial plateau fractures. A retrospective radiographic and chart review was performed on a consecutive series of patients who sustai...