Copper flotation waste is an industrial by-product material produced from the process of manufacturing copper. The main concern with respect to landfilling of copper flotation waste is the release of elements (e.g., salts and heavy metals) when in contact with water, that is, leaching. Copper flotation waste generally contains a significant amount of Cu together with trace elements of other tox...

In the search for utilization of unburned carbon from flyash, flotation has been considered by many as a possible method for reclaiming the carbon. Due to the ever-increasing need to minimize landfill materials and reutilize waste streams, NETL has reviewed flyash flotation techniques in an effort to develop a methodology for determining the floatability potential of the carbonaceous material. ...

The effects of a chelating surfactant and different foaming agents on the efficiency of cleaning process waters from a thermomechanical pulp (TMP) mill were studied in a Voith flotation cell. Turbidity measurements and gas chromatography were used to determine the removal extent and characteristics of dissolved and colloidal substances (DisCo). The metal ion content in the process waters before...

The Swan-Ganz balloon flotation catheter was introduced in 1970. It can be placed at the bedside within a few minutes even in critically ill patients. Although placement of these catheters is not difficult, some training and experience are required to avoid complications and for proper interpretation of the hemodynamic data that can be obtained by pulmonary artery catheterization. Because of th...

Flotation is a common process in sulfide ore beneficiation. Due to the restrictions and lack of access to high-quality water sources for industrial purposes, recycled water plays an important role in the flotation processes. Due to the existence of various organic and inorganic substances in the process, water influences the flotation performance. In this work, the effect of accumulation of sul...

In this study, the possibility of producing coal with less than 11% ash from tailings of flotation process was investigated. The effect of six flotation parameters: collector type, collector consumption, frother type, frother consumption, pulp density and mixing rate were studied on a sample from a tailing dam. A software based experimental design approach (DX7) was applied to determine and mod...

In this paper, the influence of Ca2+ on the flotation of a skarn type molybdenum ore and pure molybdenite mineral at pH 8 was studied using diesel as the collector. It was found that Ca2+ had little effect on molybdenum flotation at low concentrations. By further increasing Ca2+ concentration, the floatability of molybdenite—especially from the fine size fractions—was depressed even without the...

In this paper the possibility of using the pyrolysis oil derived from waste tyres as a collector in flotation of coal was evaluated. The pyrolysis oil was obtained at the initial and final pyrolysis temperatures of 400 and 700 C, respectively, and the heat holding time of 30 min. Flotation results indicated that the pyrolysis oil emulsion showed stronger collecting ability than diesel and the c...

Introduction: The presence of antibiotics due to toxicity and sustainability as well as organic compounds as a combination of hard biodegradable wastewater is an undesirable issue in many industries. The aim of this study was to evaluate the efficiency of dissolved air flotation process for aniline and penicillin G removal from aqueous solutions. Methods: This was an empirical-lab study to w...

This paper presents a new approach for flotation circuit design. Initially, it was proven numerically and analytically that in order to achieve the highest recovery in different circuit configurations, the best equipment must be placed at the beginning stage of the flotation circuits. The size of the entering particles and the types of streams including pulp and froth were considered as the bas...