Rubinstein J (1995) Cohtmn Flotation: Processes, Designs and Practices. New York: Gordon and Breach. Schubert Hand Bischofberger C (1979) On the optimization of hydrodynamics in flotation processes. In: Laskowski J (ed.) Proceedings of the 13th International Mineral Process Congress, pp. 1261-1287. Warsaw: Elsevier. Wills BA (1992) Introduction to Mineral Processing Technology, 5th edn, pp. 558...

The paper discusses two procedures of flotation of difficult-to-float oxidized coal. The first one is the normal flotation procedure which relies on wetting coal with water followed by addition of flotation reagents (dodecane, dodecyl tetraoxyethelene ether (C12E4), and 1-pentanol). The second, direct contact procedure consists of mixing pure reagents with dry coal followed by addition of water...

The residence time of liquid and solid was determined in flotation banks of mechanical cells and flotation columns at Salvador Division, Codelco-Chile. The estimation was developed from residence time distribution (RTD) measurements using radioactive tracers. Results allowed the estimation of effective pulp volumes in flotation banks and columns. It was found that industrial flotation banks are...

Fifty canine fecal samples were evaluated by five flotation procedures to compare the sensitivity of the zinc sulfate (ZnSO4) centrifugation flotation test with ZnSO4 flotation tests using benchtop incubation during the flotation period. One or more parasite species were detected in 40 samples. Results showed that centrifugation with ZnSO4 solution was significantly more likely to detect a posi...

This study investigates the flotation performance of a representative hard coal slime sample (d80 particle size of minus 0.2 mm) obtained from the Prosper-Haniel coal preparation plant located in Bottrop, Germany. Flotation was carried out with a newly designed flotation cell refurbished from an old ultrasonic cleaning bath (2.5 L volume) equipped with a single frequency (35 kHz) and two differ...

The efficiency of mineral processing operations, i.e. concentrating raw ores for metal extraction, impacts significantly on the operating cost of the final metal products. First, valuable minerals are liberated from the ore matrix in a comminution circuit, comprised of grinding (e.g., ball mills) and classification (e.g. hydrocyclones) units. The liberated minerals are subsequently concentrated...

BACKGROUND Sensory isolation in a flotation tank is a method known for inducing deep relaxation and subsequent positive health effects for patients suffering from e.g. stress or muscle tensions pains. Very few studies have investigated this method as a preventive health-care intervention. The purpose of this study was to evaluate the effects in healthy participants after receiving a series of f...

The aluminium electrolytic plants generate PAH and fluoride contaminated wastes which are usually classified as hazardous material. These residues are generally disposed in secure landfill sites. A flotation cell process was previously developed to remove PAH from these aluminium industry wastes. The tests were done on composite samples made of particle size fractions under 50mm. The efficiency...

Solid/liquid separations are commonly the first step in any wastewater treatment. Such technologies are mature and new developments are rare. However, in the last decade some significant improvements in separation techniques for industrial wastewater pretreatment have been implemented. Advances in the technology include more efficient, faster centrifugal mixing of treatment chemicals and wastew...

The present investigation deals with the recovery of iron values from the screw classifier overflow slimes from an iron ore washing plant by means of reverse cationic flotation as an alternate to direct anionic flotation. Selectivity index, an indicator of separation efficiency, was chosen as the response parameter for optimizing the quantity and evaluating a series of generically same but chem...