The localized corrosion behavior of a galvanic aluminum copper couple was investigated by in situ fluorescence imaging with a fiber-optic imaging sensor. Three different, but complementary methods were used for visualizing remote corrosion sites, mapping the topography of the metal surface, and measuring local chemical concentrations of H+, OH-, and Al3+. The first method is based on a pH-sensi...

Fiber optic seismic sensors have been increasingly recognized as promising technologies for many applications, such as intruder detection and perimeter defense systems. Among these, a military seismic sensor is especially challenging because it requires a robust, compact, reliable, easily installable and operated product. This article reports on our recent experimental investigations of a milit...

This paper describes a fiber-optic temperature sensor that uses a spectrum-modulating Sic etalon. The spectral output of this type of sensor may be analyzed to obtain a tem.+ perature measurement which is largely independent of the transmission properties of the m sensor's fiber-optic link. A highly precise laboratory-type spectrometer is described in detail, and this instrument is used to stud...

A low cost fiber-optic micro-cavity interferometric sensor is presented. The micro-cavity is fabricated at the fiber tip by splicing a silica capillary to a single mode fiber and then heating/melting the capillary to form a microsphere with an internal air cavity. Applications of the micro-cavity sensor for temperature and traverse load measurements are demonstrated. The sensor has small size a...

A novel technique of using a 1 x N star fiber optic coupler as a distributed strain sensor in a white-light interferometer to measure the distribution of strain is presented. The measuring principle and 1 x 4 star coupler with four fiber optic strain sensors are demonstrated. The experiment is performed with four sensors attached to a combination plastic specimen.

Buried Fiber Optic Intrusion Sensor. (May 2004) Eric William Maier, B.S., Texas A&M University Chair of Advisory Committee: Dr. Henry Taylor A distributed fiber optic intrusion sensor capable of detecting intruders from the pressure of their weight on the earth’s surface was investigated in the laboratory and in field tests. The presence of an intruder above or in proximity to the buried sensor...

In this study, prototype ultra-thin fiber-optic dosimeters were fabricated using organic scintillators, wavelength shifting fibers, and plastic optical fibers. The sensor probes of the ultra-thin fiber-optic dosimeters consisted of very thin organic scintillators with thicknesses of 100, 150 and 200 μm. These types of sensors cannot only be used to measure skin or surface doses but also provide...

The design and development of a plastic optical fiber (POF) macrobend temperature sensor is presented. The sensor has a linear response versus temperature at a fixed bend radius, with a sensitivity of . The sensor system used a dummy fiber-optic sensor for reference purposes having a resolution below 0.3 °C. A comprehensive experimental analysis was carried out to provide insight into the effec...

A curvature fiber optic sensor using a two-core fiber (TCF) is proposed and demonstrated. The TCF, which is designed to allow coupling between the cores, acts as a directional coupler and thus offers sinusoidal spectral response. The sensor is fabricated by splicing a 50 mm-long section of TCF between two SMFs. When the fiber is bent, the coupling coefficient between the cores is modified mainl...

Introduction: Fiber optic technology for dissolution testing has been a topic of interest for many researchers for some years. Josefson, Johansson, and Tortensson 1 published early research in this field in 1988. They explored the feasibility of using UV fiber optics for in-situ dissolution and to overcome sample turbidity interference without filtration. In 1993, Brown and Lin 2 used a single ...