The adsorption of methyl tert-butyl ether by granular activated carbon was investigated. The experimental data were analyzed using the Freundlich isotherm and the Langmuir isotherm. Although equilibrium data were found to follow Freundlich isotherm model, it were fitted better by the Langmuir model with a maximum adsorption capacity of 204.1 mg/g. The kinetic data obtained at different concentr...

This study explored the feasibility of using granular ferric hydroxide as adsorbent for the removal of NO3-N. Optimum conditions for NO3-N removal were found to be pH 5.0 and equilibrium time 80min. The equilibrium sorption isotherm was better described by Langmuir sorption isotherm model. The maximum sorption capacity of granular ferric hydroxide was 4.254mg/g at 298K. A comparison of four kin...

The ability of Clinoptilolite powder to adsorb Ni (II) ions from wastewater which was taken from a nickel plating factory was investigated through batch experiments. The Ni (II) adsorption was found to be dependent on mass of adsorbent, contact time, pH value of solution and the speed of agitation. The experimental isotherms data were fitted into Langmuir and Freundlich models. The monolayer ad...

The sorption of a protein pair on carboxylic cation exchangers with various contents of ionogenic groups is examined. The bi-Langmuir isotherm calculation is carried out from sorption data for single-component systems. It is shown that good agreement of calculated and experimental data is reached only when protein-sorbent interaction weakens because of implementation of the competitive sorption...

A biosorbent prepared from Ascophyllum nodosum seaweed biomass, FCAN2, was examined for its sorption capacity. Equilibrium batch sorption studies were performed using two-matal systems containing either (Cu + Zn), (Cu + Cd), or (Zn + Cd). In the evaluation of the two-metal sorption system performance, simple isotherm curves had to be replaced by three-dimensional sorption isotherm surfaces. In ...

Adsorption capacity of Cr (VI) onto sawdust of aspen tree and activated sawdust, was investigated in a batch system by considering the effects of various parameters like contact time, initial concentration, pH , temperature, agitation speed, absorbent dose and particle size. Cr (VI) removal is pH dependent and caused to be maximum at pH 2.0. The amounts of Cr(VI) adsorbed increased with increas...

This paper describes the performance of Granular Activated Carbon (GAC) to adsorb and separate glucose and maltose solutes from the industrial effluents by adsorption process. In this study, the capability of Granular Activated Carbon (GAC) to adsorb glucose and maltose were experimentally examined. Commercial GAC (mesh 12-20), supplied by Sigma Aldrich company in...

A fundamental study on the adsorption of metal elements on Shirasu, a pyroclastic flow deposit distributed in southern Kyushu, Japan, has been conducted. The adsorption experiment was carried out by a batch method, and by using Zn(II) and Cu(II) under several conditions; the effects of the initial concentration of metal ions, grain size, and pH were investigated. At smaller grain sizes, the amo...

Rhodamine B (Rh B) is a toxic dye that is harmful to the environment, humans, and animals, and thus the discharge of Rh B wastewater has become a critical concern. In the present study, reduced graphene oxide-supported nanoscale zero-valent iron (nZVI/rGO) was used to treat Rh B aqueous solutions. The nZVI/rGO composites were synthesized with the chemical deposition method and were characterize...

In this paper, the sorption characteristics of aniline on Cr-bentonite prepared using synthetic wastewater containing chromium was investigated in a batch system at 30 degrees C. The effects of relevant parameters, such as pH value of solution, adsorbent dosage and initial aniline concentration were examined. The experimental data were analyzed by the Langmuir and Freundlich, and Temkin models ...