In this paper, comparisons of damage evolution between 2D C/SiC and SiC/SiC ceramic-matrix composites (CMCs) under tension-tension cyclic fatigue loading at room and elevated temperatures have been investigated. Fatigue hysteresis loops models considering multiple matrix cracking modes in 2D CMCs have been developed based on the damage mechanism of fiber sliding relative to the matrix in the in...

We employ periodic density functional theory to explore the effect of cyclic tensile loading on the behavior of alumina in the threshold region of crack formation. We find evidence for nanoscale fatigue when the alumina lattice is subjected to uniaxial tensile loading and unloading and tensile stresses normal to the applied load. It is possible that such atomic-scale fatigue impacts the durabil...

The aim of the present study was to determine the development of the inspiratory muscle fatigue in healthy human during incremental cycling to exhaustion under mild and heavy resistive loaded breathing in air and oxygen. Minute ventilation, tidal volume, respiratory rate, inspiratory mouth pressure, and parasternal EMG activities were recorded during an incremental cycling test under mild (12 c...

INTRODUCTION: The feasibility of using crosslinking reagent, e.g., the genipin or methylglyoxal, to enhance the biomechanical functions of the injured or degenerated intervertebral disc has been extensively investigated. Our previous study found that genipin could recover the disc dynamic properties of mild denatured disc; however, the recovery efficiency was degraded by fatigue loading. Genipi...

Recycled concrete aggregate (RCA) is a relatively new construction material, whose applications can replace natural aggregates. To do so, extensive studies on its mechanical behavior and deformation characteristics are still necessary. RCA is currently used as a subbase material in the construction of roads, which are subject to high settlements due to traffic loading. The deformation character...

J. Belan, Faculty of Mechanical Engineering, University of Žilina, Žilina, Slovak Republic INCONEL alloy 718 is a high-strength; corrosion-resistant nickel chromium material used at -253 °C to 705 °C for production of heat resistant parts of aero jet engine mostly. The fatigue test provided on this kind materials were done via low frequency loading up to this time. Nowadays, needs of results at...

Fatigue crack growth has been observed recently in ferroelectrics under cyclic electric loading[ Does the crack grow by electric breakdown\ or by the stress _eld near the crack tip< The present paper provides a mechanistic explanation for the electric!_eld!induced fatigue crack growth[ The non!uniform electric _eld near an insulated crack tip might cause domain switching which in turn produces ...

A finite element analysis of tubular, diamond-shaped stent grafts under representative cyclic loading conditions for abdominal aortic aneurysm (AAA) repair is presented. Commercial software was employed to study the mechanical behavior and fatigue performance of different materials found in commercially available stent-graft systems. Specifically, the effects of crimping, deployment, and cyclic...

The fatigue cracks are observed in asphalt surfaces much more than ruts. This paper deals with the influence of carbon nano-tube on the fatigue life of asphalt mixtures. These samples are made up of the slabs cut by the asphalt cutting saw. Fatigue beams contain 0, 0.3, 0.6, 0.9, 1.2, and 1.5 percent of Carbon Nano-tube. The fatigue experiment was conducted using a 4-point semi-sinusoidal loadi...

in this article, failure and fracture mechanisms in an aluminum alloy (which has been used in diesel internal combustion engines), with and without ceramic thermal barrier coatings, have been investigated under isothermal and non-isothermal fatigue loadings. in this research, the base material is an aluminum-silicon-magnesium alloy and the thermal barrier coating includes a metallic bond coat l...