Title of Document: CONSTITUTIVE PROPERTY TESTING AND RELIABILITY ASSESSMENT OF LEADFREE SOLDER JOINT Yuri Lee, Master, 2010 Directed By: Professor Bongtae Han, Department of Mechanical Engineering A modified single lap shear test configuration, based on the Iosipescu geometry, is proposed to characterize mechanical properties of solder alloys. In the method, an auxiliary device (extension unit)...

Abstract Solid birch wood ( Betula pendula ) was investigated with a newly developed ultrasonic resonance test set-up enabling accelerated fully reversed fatigue experiments of wood. Ultrasonic lifetimes were measured at cycling frequency about 20 kHz up to 10 9 load cycles. For comparison, servo-hydraulic tests 50 Hz 5 × 6 performed. Numbers cycles failure plotted against stress amplitudes det...

Abstract Shape memory alloy (SMA)-based fasteners and connectors represent a class of successful SMA components that are increasingly used especially in marine or aerospace applications. The present paper aims to investigate novel C-Shaped for room-temperature vacuum pipes within particle accelerators. proposed exhibit the two-way shape effect (TW-SME), so they can generate significant axial re...

strength, flexural modulus, and contraction stress of one orthodontic composite and two flowable composites. Orthodontic brackets were bonded to 45 human maxillary premolars with the composites Transbond XT, Filtek Z-350 flow and Opallis flow and tested for shear bond strength. For measurement of flexural strength and flexural modulus, specimens were fabricated and tested under flexion. For the...

Using an osteotomy of the olecranon as a model of a transverse fracture in 22 cadaver elbows we determined the ability of three different types of suture and stainless steel wire to maintain reduction when using a tension-band technique to stabilise the bone. Physiological cyclical loading simulating passive elbow movement (15 N) and using the arms to push up from a chair (450 N) were applied u...

The menisci are frequently injured due to both degeneration and traumatic tearing. It has been suggested that the success of a meniscal replacement is dependent on several factors, one of which is the secure fixation and firm attachment of the replacement to the tibial plateau. Therefore, the objectives of the current study were to (1) determine the failure properties of the meniscal horn attac...

During design and winding of superconducting magnets at room temperature, a pre-tension under different rate is always applied to improve the mechanical stability of the magnets. However, an inconsistency rises for superconductors usually being sensitive to strain and oversized pre-stress which results in degradation of the superconducting composites' critical performance at low temperature. Th...

Analyses of areal variations in the subsidence and rebound occurring over stressed aquifer systems, in conjunction with measurements of the hydraulic head fluctuations causing these displacements, can yield valuable information about the compressibility and storage properties of the aquifer system. Historically, stress-strain relationships have been derived from paired extensometer/piezometer i...

A load path change (LPC) from shear to tension has been studied for a recrystallized 2198 T8 aluminium alloy sheet material by three-dimensional (3D) X-ray imaging combined with image correlation and interpreted complementary 3D finite element (FE) simulations. cross-shaped specimen was designed the non-proportional loading multiscale study. The effect of LPC on formability related strain local...