Background: The first-order shear deformation theory (FSDT) for plates requires a shear correction factor due to the assumption of constant shear strain and shear stress across the thickness; hence, the shear correction factor strongly influences the accuracy of the deflection solution; the third-order shear deformation theory (TSDT) does not require a correction factor because it facilitates t...

the mechanical behaviour of rockfill materials and aggregates depends not only on particle size and compaction, but also on their strength and lithological properties. in this research two types of large triaxial and direct shear tests are performed on rockfill materials. this paper compares the stress-strain behaviour of sandstone and andesibasalt materials in triaxial compression tests (3006...

Creep strength of oriented orthopyroxene single crystals was investigated via shear deformation experiments under lithospheric conditions [P (pressure) = 1.3 GPa and T (temperature) = 973–1,373 K]. For the A-orientation (shear direction [001] on (100) plane), the samples have transformed completely to clinoenstatite and much of the deformation occurred after transformation. In contrast, for the...

It is well known that for laminated composite plates a Levy-type solution exists only for cross-ply and antisymmetric angle-ply laminates. Numerous investigators have used the Levy method to solve the governing equations of various equivalent single-layer plate theories. It is the intension of the present study to introduce a method for analytical solutions of laminated composite plates with ar...

In a Z-core sandwich panel, the shear stiffness of the sandwich panel in the weak direction which is perpendicular to the placement of the Z-cores is much smaller than the bending stiffness because the hollow section between the two facing plates cannot sustain shear action. Because of this fact, the shear deformation of a Z-core sandwich panel under bending in the weak direction cannot be igno...

The investigation aims at: (i) constructing a modified higher-order shear deformation theory in which Kirchhoff's hypotheses are relaxed, to allow for shear deformations; (ii) validating the present 5-parameter-smeared-laminate theory by comparing the results with exact solutions; and (iii) applying the theory to a specific problem of the postbuckling behavior of a flat stiffened fiber-reinforc...

This paper presents the governing equations on the rectangular plate with the variation of material stiffness through their thick using higher order shear deformation theory (HSDT). The governing equations are obtained by using Hamilton's principle with regard to variation of Young's modulus in through their thick with regard sinusoidal variation of the displacement field across the thickness. ...

Based on generalized laminate plate theory, the formulation of a one-dimensional beam finite element with layer-wise constant shear (BLCS) is presented. The linear layer-wise representation of in-plane displacements permit accurate computation of normal stresses and transverse shear stresses on each layer for laminated beams with dissimilar ply stiffnesses. The BLCS formulation is equivalent to...

Analytical methods presented to analyze the buried steel pipelines at strike-slip fault crossing use the Euler-Bernoulli beam theory. The cross-section of a buried pipe that is completely surrounded by soil cannot rotate freely and would not be remained perpendicular to the bending line after deformation. So it would be better to take into consideration a rotation between the cross-section and ...

In this paper, dynamic modeling of a double layer cylindrical functionally graded (FG) microshell is considered. Modeling is based on the first-order shear deformation theory (FSDT), and the equations of motion are derived using the Hamilton's principle. It assumes that functionally graded length scale parameter changes along the thickness. Generalized differential quadrature method (GDQM) is u...