With flexible leaded parts, the solder-joint failure process involves a complex interplay of creep and fatigue mechanisms. To better understand the role of creep in typical multi-hour cyclic loading conditions, a specialized non-linear finite-element creep simulation computer program has been formulated. The numerical algorithm includes the complete part-lead-solder-P WB system, accounting for ...

in this paper the effects of non-linearity of suspension on dynamic behavior of a railway wheelset has been studied. this wheelset has four degrees of freedom that with two constraints it has reduced to two degrees of freedom. vermeulen-johnson theory has been used to calculate contact forces between wheel and rail. in this study the creep coefficients have considered constant. any linearizatio...

Tensile and creep properties of new austenitic steel Sanicro 25 at room temperature and operating temperature 700 °C were investigated by testing on miniature specimens. The results were correlated with testing on conventional specimens. Very good agreement of results was obtained, namely in yield and ultimate strength, as well as short-term creep properties. Although the creep rupture time was...

Creep deformation in < 001 > oriented single crystals of CMSX-3 has been studied at temperatures around 850°C at a stress level of 552 MPa. Detailed observations of the evolution of the dislocation structure during creep have been made. TEM stereo pairs show creep deformation in the matrix phase, leaving the 7’ precipitates undeformed. In previously undeformed crystals there is a brief incubati...

steady state creep of the alloy was in a thermodynamical steady state, (2) which configuration of the dislocation network was contributing to the creep strength, and (3) which change in the dislocation network was the cause of the creep recovery. Specimens were furnace-cooled under stress and then observed by transmission electron microscopy. The creep stress was reduced during the test and the...

It is well known that the solution cooling rate has a great effect on the creep life of superalloys. In this research, three typical cooling rates were applied to generate different distributions of γ’ precipitates for creep tests. Ingots used to make specimens were manufactured by hot extrusion, and the master alloy had the composition of an FGH4096 power metallurgy superalloy. SEM and SESD we...

An evolutionary method is proposed for the constrained optimization of chemical engineering processes. Apart from the classical mutation, crossover and creep (small mutation), it makes use of several novel reproductive operators: shift, smoothing, extrapolation and swapping. An adaptive mutation rate is used to guard against stalling at local peaks. The method was able to solve dynamic optimiza...

Grain-boundary (GB) diffusion creep (Coble creep) is the dominant deformation mechanism for the fine-grained materials under low stress and at elevated temperature [1]. From the classical Coble creep formula [1], the strain rate is proportional to the external stress, and inversely proportional to the cube of the grain size: 3 ~ − d σ ε& . During creep deformation the grains become elongated in...

This study presents an application of artificial neural networks (ANN) for the prediction of repeated creep test results for polypropylene (PP) modified asphalt mixtures. Polypropylene fibers are used to modify the bituminous binder in order to improve the physical and mechanical properties of the resulting asphaltic mixture. Marshall specimens, fabricated with M-03 type polypropylene fibers at...