It is not possible to directly measure the total mass of gas and liquid in the annulus and geological properties of the reservoir during petroleum exploration and production drilling. Therefore, these parameters and states must be estimated by online estimators with proper measurements. This paper describes a nonlinear Moving Horizon Observer to estimate the annular mass of gas and liquid, and ...

Drilling fluid plays the same role in oil and gas well drilling as blood human body. A new type of oil-in-water (o/w) emulsion has been developed using diesel dispersed phase, brine water continuous xanthan gum viscosity modifier clay stabilizer filtration controlling agent. Initially, standard recommended techniques were opted to detect rheological properties emulsions. The fluids have also sh...

the main task of drilling the formation by the bit is done via scraping, crushing and grinding. discharging the fluid from the bit nozzles is done with high pressure which assists to break the rocks. different parameters affect the bit selection and design for each drilling formation, but the most important one is drillability that depends on hardness of the formation. in this paper, the design...

During exploration for oil and gas, a technical drilling fluid is used to lubricate the drill bit, maintain hydrostatic pressure, transmit sensor readings, remove rock cuttings and inhibit swelling of unstable clay based reactive shale formations. Increasing environmental awareness and resulting legislation has led to the search for new, improved biodegradable drilling fluid components. In the ...

Blast furnace slag (BFS) was added into drilling fluid as a mud cake modifier (MCM) for the reuse of BFS. The effects of MCM on drilling fluid rheology and shear strength of cementformation interface (SSCFI) were evaluated. The experimental results showed that the optimized formula of the drilling fluid has 1.0 wt% MCM. The simulation results showed that SSCFI increased significantly with the a...