Title of Dissertation: CREEP CORROSION OVER PLASTIC ENCAPSULATED MICROCIRCUIT PACKAGES WITH NOBLE METAL PREPLATED LEADFRAMES Ping Zhao, Doctor of Philosophy, 2005 Dissertation Directed By: Dr. Michael Pecht, Professor, Department of Mechanical Engineering Field failures were observed to be caused by the bridging of corrosion products across lead fingers. This phenomenon was identified as creep ...

In the presented article, the temperature effect was studied on creep properties and fracture behaviors of AlSi12Cu3Ni2MgFe aluminum-silicon alloys, unreinforced and reinforced with SiO2 nano-particles. For such objective, standard specimens were fabricated by gravity casting and stir-casting methods, for aluminum alloys and nano-composites, respectively. Then, force-controlled creep...

Abstract—Rockfills are widely used in civil engineering, such as dams, railways, and airport foundations in mountain areas. A significant long-term post-construction settlement may affect the serviceability or even the safety of rockfill infrastructures. The creep behavior of rockfills is influenced by a number of factors, such as particle size, strength and shape, water condition and stress le...

This paper describes a new approach which can be used to interpret the experimental creep deformation data obtained from miniaturized thin plate bending specimen test to the corresponding uniaxial data based on an inversed application of the reference stress method. The geometry of the thin plate is fully defined by the span of the support, l, the width, b, and the thickness, d. Firstly, analyt...

creep compliance is one of the fundamental tests of mechanistic- empirical flexible pavement design procedure in the aashto 2002 design guide. in this research, a new artificial neural network model for estimating the hma creep compliance with the generalization ability of r=0.949 has been developed successfully using feed forward multi layer perceptron artificial neural networks (anns) with le...

The effects of surface pretreatment on the rate of scribe-creep caused by underpaint corrosion on coated AA2024-T3 (UNS A92024) were investigated. Scribe-creep experiments were conducted on epoxy polyamide-coated (average coating thickness: ~10 μm) AA2024-T3 in 80% relative humidity at 25°C, 40°C, and 50°C. Scribe-creep was observed to be enhanced by exposure test temperature regardless of surf...

The paper presents the test results of beams made of chipboards, fibreboards, wood as per referenced items [1], [2], [3]. Adopting various rheological models, their behaviour in time under permanent load was described. The model testing of a box-section beam, with wooden flanges connected with continuous chipboard lacings, was described. It was found that the construction of beams made of unlim...

Time-dependent creep stress redistribution analysis of thick-walled FGM spheres subjected to an internal pressure and a uniform temperature field is investigated. The material creep and mechanical properties through the radial graded direction are assumed to obey the simple power-law variation throughout the thickness. Total strains are assumed to be the sum of elastic, thermal and creep strain...

a r t i c l e i n f o A powerful and robust numerical homogenization method based on fast Fourier transform (FFT) is formulated to identify the viscoelastic behavior of calcium silicate hydrates (C-S-H) in hardened cement paste from its heterogeneous composition. The identification is contingent upon the linearity of the creep law. To characterize cement paste microstructure, the model develope...

The aim of this study was to understand the chemistry of spelt (Triticum aestivum ssp. spelta) gluten in relation to its quality, to classify European spelt cultivars based on gluten quality, and to compare their protein compositions with those of modern wheats. Gluten quality of two sets of 25 spelt cultivars was studied using dynamic oscillatory and creep tests, an SDS sedimentation test, moi...