Plastic encapsulated microcircuits with aluminum triple track structures were exposed to mixed flowing gas conditions to simulate and accelerate possible environments during long-term storage. No increase in resistance was measured and no corrosion products were observed after 800 h of accelerated exposure. Further experimentation indicated that chloride gas reacts with surface moisture in micr...

background : widespread use of x-band frequency (a part of the super high frequency microwave) in the various workplaces would contribute to occupational exposure with potential of adverse health effects.  according to limited study on microwave shielding for the workplace, this study tried to prepare a new microwave shielding for this purpose. methods: we used ei-403 epoxy thermosetting resin ...

Polysulfide resins,with trade name of  G4 and G112, with short and long chain lengths respectively, were used as reactive modifiers to toughen epoxy resin. The effects of molecular weights of G4 and G112 on impact resistance, dielectric constant, thermal conductivity as well as decomposition  heat and adhesion properties of toughened epoxy were investigated. The impact strength and the diel...

Abstract Corrosion and icing are common problems in aerospace wind power fields. In order to improve the thermal hydrophobic properties of epoxy-based anticorrosive coatings expand application various working environments, modified graphene oxide (GO) was introduced into prepare GO/polyvinyl butyral/epoxy resin nanocomposite coatings. The preparation process coating optimized by response surfac...

The aim of this study is to investigate effects of isothermal aging on mechanical properties of fiber metal laminates (FMLs) and glass/epoxy composites. For this purpose, both materials were fabricated using the wet lay-up manufacturing technique under vacuum pressure. Both the glass/epoxy composites and the FML specimens were then subjected to isothermal aging (130°C, dried air) for up to 5 we...

the idea of smart corrosion inhibition is basis on either inhibitor consumption where it is needed or reducing harmful matrix interaction with it. in addition, applying corrosion inhibitor in a coating causes many problems such as loss of inhibition capability, coating degradation, or both. a useful technique to overcome this problem is applying of inert host systems of nanometer dimensions as ...

in the present research work, the flexural modulus and strength of glass fiber-epoxy resin and carbon fiber-epoxy resin composites have been enhanced through fiber tension during curing of the polymeric resin. this study showed that the tension applied on the fibers increased the flexural modulus of the glass-epoxy composites up to 12% and the flexural strength up to 19%. the flexural modulus a...

these days, most of the marine structures which are constructed and used in persian gulf, are made of st37 steel. due to oil and gas sources excavated, the number of these structures is constantly increasing. on the other hand, these types of structures are exposed to corrosive environments and it is seriously critical for these structures to be used for many years. coal tar epoxy (trade name),...

Corrosion of steel reinforcement is one of the main durability problems facing reinforced concrete infrastructures worldwide. This paper will summarize the results of a multi-phase experimental program undertaken at the University of Waterloo to investigate the viability of using externally bonded fiber reinforced polymer (FRP) laminates to rehabilitate corrosion-damaged reinforced concrete bea...