Due to growing environmental concerns of the cement industry, alternative cement technologies have become an area of increasing interest. It is now believed that new binders are indispensable for enhanced environmental and durability performance. Self-compacting Geopolymer concrete is an innovative method and improved way of concreting operation that does not require vibration for placing it an...

Environmental and economic factors increasingly encourage higher utility of industrial by-products. The basic objective of this study was to identify alternative source for good quality aggregates which is depleting very fast due to fast pace of construction activities in India. EAF oxidizing slag as a by-product obtained during the process in steel making industry provides great opportunity to...

Sulfate attack is a series of physico-chemical reactions between hardened cement paste and sulfate ions. Sulfate ion penetration into the hydrated cement results in the formation of voluminous and deleterious phases such as gypsum and ettringite which are believed to cause deterioration and expansion of concrete. Concrete deterioration due to sulfate attack depends on many parameters, however, ...

Ceramic waste is most commonly produce from ceramic industry, this waste is in the form of pest and hard form, pest waste is known as the filter waste or slurry waste, which is produced at the end of polishing and finishing of ceramic tiles. The paper discuss that ceramic slurry waste powder is replaced by cement in concrete. Concrete grade M25 was made by replacing by 0% to 30% of Ordinary Por...

This research aims to produce non-structural concrete with mixed recycled aggregates (MRA) in upscaled applications with low-cement content. Four slabs were executed with concrete made with different ratios of coarse MRA (0%, 20%, 40% and 100%), using the mix design, the mixing procedures and the facilities from a nearby concrete production plant. The analysis of the long-term compressive and s...

the marble slurry wastes (msw) produced by marble industry is left unattended in theenvironment which causes serious environmental problems. in order to evaluate its potential usage in normal1:2:4 concrete, this study was designed, where the partial replacement of cement with msw was examined.replacement of cement with msw from 0 to 100%, and also its usage as an additive material 10% and 20% b...

in this paper, the possibility of using recycled aggregate (ra) and ground granulated blast furnace slag (ggbfs) to produce a structural concrete was studied by compromising strength to a lesser extent. hence an attempt has been made to study the strength and durability characteristics of the ggbfs-based recycled aggregate concrete. four different groups of mixes were designed by replacing natu...

Recent tendencies in concrete technology have been towards to high- performance concrete with a low water-cement ratio. However, high performance concretes have some problems. One of the problems is early-age cracking due to autogenous shrinkage. This study presents the results of an experimental investigation carried out to evaluate the autogenous shrinkage of high-strength concrete. Accordi...

In this paper a review is presented based on experimental studies done on high performance concrete. The compiled test data revealed distinct differences in the mechanical properties of normal, high strength and high performance concrete. Shape of the specimen ( cube, cylinder, beam etc), size of specimen, magnitude of temperature load applied on the specimen, percentage of fibers varied in the...