the biqian-10 block, located in henan oilfield of sinopic, contains many thin and interbedded reservoirs, which have been operated by cyclic steam stimulation for 20 years or more. therefore, it is a challenge to implement the conventional steam flooding. in order to improve the recovery of steam flooding, urea was used to assist steam flooding. urea can decompose into co2 and nh3, which are be...

Geologic carbon storage (GCS) is a crucial part of a proposed mitigation strategy to reduce the anthropogenic CO2 emissions to the atmosphere. During this process, CO2 is injected as super critical carbon dioxide (SC-CO2) in confined deep subsurface storage units, such as saline aquifers and depleted oil reservoirs. The deposition of vast amounts of CO2 in subsurface geologic formations may ult...

Two cottonseed oil biodiesel samples (cottonseed oil methyl esters, COME) produced in Clemson lab, together with other two commercial cottonseed oil biodiesels were evaluated on their engine performance with the No. 2 diesel fuel as a reference. The results revealed that emission of CO, CO2 and NOx from cottonseed oil biodiesels was lower than that of the No. 2 diesel fuel. CO decreased by 13.8...

Optimum concentrations of anesthetic clove oil and anesthetic lidocaine-HCl were determined for a species of adult marine medaka, Oryzias dancena, over a range of salinity conditions, and investigated in a transport simulation experiment by analyzing various water and physiological parameters. Research indicated that the higher the concentration of anesthetic at each salinity, the shorter the a...

Carbon Capture and Storage (CCS) is a method to reduce anthropogenic greenhouse gas emissions thereby mitigating global warming. In CCS, carbon dioxide (CO2) is captured from fossil fuel-fired power plants or other large point-source emitters, purified, compressed and injected deep underground into subsurface formations at depths of or greater than 800m. At such depths CO2 is in a supercritical...

The Biqian-10 block, located in Henan Oilfield of Sinopic, contains many thin and interbedded reservoirs, which have been operated by cyclic steam stimulation for 20 years or more. Therefore, it is a challenge to implement the conventional steam flooding. In order to improve the recovery of steam flooding, urea was used to assist steam flooding. Urea can decompose into CO2 and NH3, which are be...

Silver nanoparticle-decorated graphene nanocomposites were synthesized by a facile chemical reduction approach with the assistance of supercritical CO2 (ScCO2). The silver nanoparticles with diameters of 2-16 nm are uniformly distributed and firmly anchored on graphene nanosheets. The tribological properties of the as-synthesized nanocomposites as lubricant additives in engine oil were investig...

We report the construction of an optically accessible flow test section made of quartz to simulate carbon dioxide flow through throttling devices in refrigeration systems. The existence of traces of lubricant oil (specifically Polyolester (POE)) in the working medium makes the flow amenable to Laser Induced Fluorescence (LIF) diagnostics. The molecular structure of these lubricants is rich in c...

Carbon dioxide has been used commercially to recover oil from reservoirs for more than 40 years. Currently, CO2 flooding is the second most applied enhanced oil recovery (EOR) process in the world behind steam flooding. Water alternating gas (WAG) injection has been a popular method to control mobility and improve volumetric sweep efficiency for CO2 flooding. Average EOR is about 9.7% with a ra...