The paper presents the results of comparative analysis properties coatings based on chromium, nickel and iron borides. alloy obtained in process electron-beam surfacing powder mixture “amorphous boron – 10 wt.% chromium” has best properties. This is explained by structures, fine chromium borides Cr2B complex (Fe, Cr)2B, distributed austenitic matrix. material modified this way a nitric acid sol...

CONTEXT Remelting previously cast base metal alloy can adversely affect the mechanical properties of the alloy and necessitates addition of new alloy. AIMS To study the effect of remelting different combinations of new and used cobalt-chromium (Co-Cr) alloy on its mechanical properties and microstructure. MATERIALS AND METHODS Using induction casting, 24 tensile test specimens were prepared...

The objective of this study was to evaluate the retention force of T-bar clasps made from commercially pure titanium (CP Ti) and cobalt-chromium (Co-Cr) alloy by the insertion/removal test simulating 5 years use. Thirty-six frameworks were cast from CP Ti (n=18) and Co-Cr alloy (n=18) with identical prefabricated patterns on refractory casts from a distal extension mandibular hemi-arch segment....

The purpose of this study was to evaluate and compare the bond strengths between resin composite veneer and laser-sintered cobalt-chromium (Co-Cr) alloy with and without retention devices (Laser-R and Laser-N respectively). Cast Co-Cr alloy with and without retention devices (Cast-R and Cast-N respectively) were also prepared for fabrication technique comparison. Disk-shaped Co-Cr alloy specime...

The absence or poor chemical bonding of acrylic resin to Cobalt-Chromium metal frameworks, often introduces microleakage and bond failure at the interface. The aim of this study was to compare the shear bond strength of sandblasted cast and ingot cobaltchromium alloy to heat-cured and self-cured acrylic resins primed with four different metal primers. Fifty Co-Cr Ingot and fifty cast specimens ...

The original protocol for implant prosthesis recommends the use of a gold framework for acrylic and ceramic prosthesis. However, due to its high cost, the use of alternative alloys is desired. This study compares the marginal accuracy of pre-made cylinders versus plastic cylinders cast with two different base metal casting alloys. Five samples each of (1) plastic cylinder cast in cobalt-chromiu...