The influence of variation in rib-height to channel-height ratio (e/H) on the heat transfer and pressure drop characteristics inside a channel with corrugated upper and lower plates was investigated numerically in the present study. The governing equations were solved by using finite volume approximations for a wide range of (0.06 < e/H < 0.26) and Reynolds numbers (5400 < Re < 23000), with a m...

In this paper, we propose a new framework for joint encryption encoding scheme based on polar codes, namely efficient and secure joint secret key encryption channel coding scheme. The issue of using new coding structure, i.e. polar codes in Rao-Nam (RN) like schemes is addressed. Cryptanalysis methods show that the proposed scheme has an acceptable level of security with a relatively smaller ke...

In future high-speed self-routing photonic networks based on all-optical time division multiplexing (OTDM) it is highly desirable to carry out packet switching, clock recovery and demultplexing in the optical domain in order to avoid the bottleneck due to the optoelectronics conversion. In this paper we propose a self-routing OTDM node structure composed of an all-optical router and demultiplex...

This paper first gave a brief introduction of communication channel models, and then describes the characteristics of the channel emulator. According to the characteristics of the channel model, multipath is a difficult problem for hardware implementation. In order to simplify the hardware, the polyphase filter can be used for multi-path delay. Then the paper reviews the polyphase filter in the...

Simulations of mobile radio systems require propagation models for determining the channel characteristics for a given arbitrary scenario. Propagation path loss models can be used to predict wireless channel characteristics like received signal strength, multipath effects, and interference. These predictions are an important aspect of simulation of wireless networks and aid in the high-level ne...

using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. in this work two-dimensional incompressible laminar flow of a nanofluid e...

in this paper, the temperature dependence of some characteristics of cylindrical gate-all-around si nanowire field effect transistor (gaa-si-nwfet) is investigated to representing the temperature nano-sensor structures and improving their performance. firstly, we calculate the temperature sensitivity of drain-source current versus the gate-source voltage of gaa-si-nwfet to propose the temperatu...

449 Abstract— We have analyzed channel doping and dimensions(channel length, width and thickness) for the optimum subthreshold characteristics of DG(Double Gate) MOSFET based on the model of MicroTec 4.0. Since the DGMOSFET is the candidate device to shrink short channel effects, the determination of design rule for DGMOSFET is very important to develop sub-100nm devices for high speed and low ...

The Multiple-Input-Multiple-Output (MIMO) technique was introduced to address the growing demand for higher data-rate applications in communication standards like 3G, WLAN, WiMAXTM. In MIMO systems, both the radio channel propagation conditions and antenna characteristics influence the end user’s quality-of-service (QoS). MIMO channel models, with the ability to simulate the multipath fading th...