The longevity of hip prostheses is contingent on the stability of the implant within the cavity of the femur bone. The cemented fixation was mostly adopted owing to offering the immediate stability from cement-stem and cement-bone bonding interfaces after implant surgery. Yet cement damage and stress shielding of the bone were proven to adversely affect the lifelong stability of the implant, es...

The dimensional changes of 4 types commercial luting cements after setting were examined in distilled water, using a developed thermal expansion testing apparatus. The measurements were carried out under three conditions: increasing temperature (from 37•Ž to 60•Ž), decreasing temperature (from 37•Ž to 10•Ž), and constant temperature (37•Ž). The results indicated that: (1) the zinc phosphate cem...

INTRODUCTION To determine and compare the pH, conductivity and calcium release of an experimental Portland cement (PE) consisting of trioxid mineral aggregate and a comercially available modified Portland cement (C.P.M.) after 1, 2, 3, 4, 8, 10, 15 and 30 days. MATERIAL AND METHODS Cements were mixed following the manufacturer's instructions, with a powder: liquid ratio of 3:1. Each cement wa...

This study evaluated the ability of three materials--a resinous root canal sealer (Sealer 26) prepared in a thick consistence, a reinforced zinc oxide-eugenol cement (IRM), and a glass-ionomer cement (Fuji IX)--in preventing bacterial leakage. Retrofilled teeth were mounted in an apparatus and then challenged by human saliva. The number of days required for the bacteria from saliva to penetrate...

The chloride penetration resistance of phosphoaluminate cement (PAC) concrete was investigated in this study. The effects of mixture proportioning parameters, including cement content, water–cement ratio (w/c), and superplasticizer content on chloride ion penetration resistance of PAC concrete were investigated by the rapid chloride migration test (RCM). The result shows that the increase of ce...

Concurrently to research conducted on ordinary Portland cement (PC), new types of binders were developed during the last decades. These are formed by alkali-activation of metakaolin or ground-granulated blast furnace slag (GGBFS) and are named, respectively, geopolymers (GP) or alkali-activated slag (AAS). Four different cementitious materials were synthesised: PC, AAS, GP, and a mix GP-AAS and...

Currently there is no reliable objective method to quantify the setting properties of acrylic bone cements within an operating theatre environment. Ultrasonic technology can be used to determine the acoustic properties of the polymerising bone cement, which are linked to material properties and provide indications of the physical and chemical changes occurring within the cement. The focus of th...

Geopolymer cement was evaluated as wellbore sealing material for carbon dioxide geosequestration application. Curing of cement system in saline water and strength testing in triaxial stress state condition under lateral confinement is relevant to primary cementing in CO2 geosequestration wellbore in saline aquifer. Geopolymer cement was cured in saline water (both at ambient conditions for 28 d...

First generation glass ionomer bone cement was introduced by Wilson and Kent in 1970s and used in dental procedures . In 1989 Hehl et al. reported their experiences of fixing incudostapedial joint with glass ionomer cement . After this study many authors have presented their glass ionomer bone cement ossiculoplasty series [3,5] They showed that very satisfactory hearing improvements can be obta...

introduction: particle size and distribution can influence the properties of materials. this study analyzed and compared the particle size of root mta, calcium hydroxide (ch), and a new endodontic cement called calcium enriched material (cem). materials and methods: the particle size of each material was analyzed three times using 0.05 mg of test material with a particle size analyzer. the part...