Airborne particulate matter in the silicon carbide (SiC) industry is a known health hazard. The aims of this study were to elucidate whether the particulate matter generated inside the Acheson furnace during active operation is representative of the overall particulate matter in the furnace hall, and whether the Acheson furnaces are the main sources of ultrafine particles (UFP) in primary SiC p...

The literature on reduction of excess sludge production by ozonation is summarized. Two sequencing batch reactor experiments where sludge is ozonated for this purpose are performed. The purpose of these is to evaluate the prospects of using ozonation to reduce excess sludge production in two different kinds of sludge. Urban sewage sludge is used in the first, and paper mill sludge in the second...

In this paper, by using the data of steel melting plant which contains major non-linear load i.e., induction furnace, we modeled such a system, which contains three 12-tons induction furnace in PSCAD software and simulated for three different operating conditions & studied harmonic pattern. Keywords—Induction Melting Furnace;Steel Melting Shop;Harmonics Analysis;Power Quality.

In this work, we introduce a furnace-balancing scheme that generates an optimal furnace-side feed distribution that has the potential to improve the thermal efficiency of a reformer. The furnace-balancing scheme is composed of four major components: data generation, model identification, a model-based furnace-balancing optimizer and a termination checker. Initially, a computational fluid dynami...

The main objective of this study was to investigate the rheology of mixed primary and secondary sludge and its dependency on solid content and temperature. Results of this study showed that the temperature and solid concentration are critical parameters affecting the mixed sludge rheology. It was found that the yield stress increases with an increase in the sludge solid content and decreases wi...

To understand the diversity and abundance of antibiotic resistance genes (ARGs) in pharmaceutical wastewater treatment bioreactors, the ARGs in sludge from two full-scale pharmaceutical wastewater treatment plants (PWWTPs) were investigated and compared with sludge samples from three sewage treatment plants (STPs) using metagenomic approach. The results showed that the ARG abundances in PWWTP s...

The following sludge reduction alternatives were tested in wastewater biological reactors: oxic-settling-anaerobic (OSA-process); ultrasonic disintegration (UD); chlorination (CH); 3,3',4',5tetrachlorosalicylanilide (TCS); and folic acid (FA). Compared to the control system, UD reduced 55% of the sludge production, and greater substrate and nutrient removal efficiency was achieved. CH worsened ...

In this paper, a new iron-carbon micro-electrolytic filler for wastewater treatment was prepared using the blast furnace dust. The effects of preparation conditions on performance during were investigated. optimal obtained, which provided an experimental theoretical basis use metallurgical dust sludge in fillers. From results treating methyl orange-simulated with fillers different conditions, i...

A non-linear model has been developed for a gas-fired furnace in which oil is heated. The model is applicable from minimum to maximum heat load of the furnace. The dynamics of the model have been compared to experimental results, which were obtained for a pilot-scale furnace. They are in good agreement. A cascade control with feed-forward action has been compared to single feed-back control. Pr...

Sludge minimization by thermal treatment within activated sludge process was investigated at pilot scale. A 90°C treatment was set up in the return activated sludge loop. When keeping apparent sludge age at 15 days, 90°C treatment decreased sludge production by 30.4%. However, effluent quality was altered. A sludge minimization ASM1 based model was set up and calibrated against experimental dat...