نتایج جستجو برای: b4c

تعداد نتایج: 739  

Journal: :Nano letters 2015
Dongwoo Lee Gi-dong Sim Kejie Zhao Joost J Vlassak

Reactive nanolaminates afford a promising route for the low-temperature synthesis of zirconium diboride, an ultrahigh-temperature ceramic with metallic properties. Although the addition of carbon is known to facilitate sintering of ZrB2, its effect on the kinetics of the formation reaction has not been elucidated. We have employed a combined approach of nanocalorimetry and first-principles theo...

2016
Susann Schmidt Carina Höglund Jens Jensen Lars Hultman Jens Birch Richard Hall-Wilton

access at Springerlink.com ABSTRACT B4C coatings for B-based neutron detector applications were deposited using high-power impulse magnetron sputtering (HiPIMS) and direct current magnetron sputtering (DCMS) processes. The coatings were deposited on Si(001) as well as on flat and macrostructured (grooved) Al blades in an industrial coating unit using B4C compound targets in Ar. The HiPIMS and D...

2002
Gary S. Was Benjamin M. DeKoven

Surfaces of boron carbide (B4C) were implanted with 200 keV N: or 100 keV AI + ions to a dose of 8 x 10” cm‘. Ultralow load indentation via the Nanoindenter was used to determine the changes in surface hardness and elastic modulus following implantation. A pin-on-disk testing device in ultrahigh vacuum was used for measuring changes in friction and wear of the implanted disks. Results of hardne...

2012
G. Kibria B. B. Pradhan B. Bhattacharyya

In micro-electrical discharge machining (micro-EDM), dielectric plays a significant role during the machining process as different types of dielectrics have different chemical compositions, cooling rates and dielectric strengths. For this, dissimilar process responses are accounted when machining in EDM at micron level. The present paper investigates micro-EDM characteristics such as material r...

Journal: :Journal of Nanomaterials 2022

The mechanical properties of different polymer matrix composites are discussed in this research study. These multiphase materials which reinforcing elements and a suitably combined. 18 PMCs, including nylon 66 reinforced with 5, 15, 25% wt% silicon carbide (SiC) boron (B4C), were evaluated using an injection moulding technique at three pressures optimization process parameters like reinforcemen...

2012
A. N. Morozovska E. A. Eliseev S. L. Bravina Francesco Ciucci G. S. Svechnikov Long-Qing Chen S. V. Kalinin

Related Articles Sodium ionic conduction in complex hydrides with [BH4]− and [NH2]− anions Appl. Phys. Lett. 100, 203904 (2012) Defect chemistry of Ti-doped antiferroelectric Bi0.85Nd0.15FeO3 Appl. Phys. Lett. 100, 182902 (2012) Fundamentals of ionic conductivity relaxation gained from study of procaine hydrochloride and procainamide hydrochloride at ambient and elevated pressure J. Chem. Phys....

ژورنال: نانو مواد 2018
حمیدرضا بهاروندی مینا سعیدی حیدری,

هدف از این تحقیق، بررسی تاثیر دمای سینتر بر سنتز و خواص نانوکامپوزیت‌های B4C-TiB2 به روش درجا جهت دستیابی به نمونه‌هایی با wt.% 10 نانوذرات TiB2 است که بر این اساس مواد اولیه TiO2، کربن و B4C مورد استفاده قرار گرفتند. ابتدا پیش از انجام هر گونه عملیات آزمایشگاهی و با استفاده از نرم‌افزار HSC Chemistry، میزان تغییرات انرژی آزاد واکنش‌های بین B4C، TiO2 و کربن و در نتیجه انجام‌پذیری آن‌ها مورد برر...

Journal: :Journal of Advanced Science 2000

Journal: :Journal of The European Ceramic Society 2022

The elevated temperature thermal properties of zirconium diboride ceramics containing boron carbide additions up to 15 vol% were investigated using a combined experimental and modeling approach. addition B4C led decrease in the ZrB2 grain size from 22 µm for nominally pure 5.4 B4C. measured room conductivity decreased 93 W/m·K 80 also as increased. For ZrB2, was 67 at 2000 °C compared 55 A mode...

ژورنال: :مواد پرانرژی 0
معین گنجی moein ganji یونس کریمی کاکاوند yoones karimi kakavand علی مهدی پور عمرانی ali mehdipoor omrani علی علیزاده ali alizade

چکیده تراکم پودر انفجاری یکی از روش های توسعه یافته متالورژی پودر می باشد که با توجه به محدودیت های روش متالورژی پودر سنتی جهت شکل دهی پودر مواد، توسعه یافته است. در این فرآیند به منظور دست یابی به دانسیته بالاتر به جای استفاده از نیروی پرس از انرژی آزادشده ی انفجار یک ماده منفجره برای فشردن و زینترینگ همزمان پودر استفاده می شود. تراکم پودر انفجاری با دو روش اصلی مستقیم و غیرمستقیم قابل انجام ا...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید