The recent success of continuous-flow circulatory support devices has led to the growing acceptance of these devices as a viable therapeutic option for end-stage heart failure patients who are not responsive to current pharmacologic and electrophysiologic therapies. This article defines and clarifies the major classification of these pumps as axial or centrifugal continuous-flow devices by disc...

ABSTRACT Local measurements and 3-D CFD simulations in GasLiquid cylindrical Cyclone (GLCC) separators are scarce. The main objective of this study is to conduct local measurements and 3-D CFD simulations to understand the swirling flow behavior in a cylindrical cyclone with one inclined tangential inlet. Axial and tangential velocities and turbulent intensities across the GLCC diameter (ID=3.5...

Plus BROWSE SEARCH IEEE XPLORE GUIDE SUPPORT View TOC Rotating stall control for axial flow compressors Belta, C. Guoxiang Gu Sparks, A. Banda, S. Dept. of Electr. & Comput. Eng., Louisiana State Univ., Baton Rouge, LA; This paper appears in: Decision and Control, 1998. Proceedings of the 37th IEEE Conference on Publication Date: 1998 Volume: 3, On page(s): 2557-2562 vol.3 Meeting Date: 12/16/1...

In this paper, we examine the movement of particles within a continuous powder mixer using PEPT (Positron Emission Particle Tracking). The benefit of the approach is that the particle movement along the vessel can be measured non-invasively. The effect of impeller rotation rate, powder flow rate, and powder cohesion on the particle trajectory, dispersive axial transport coefficient, and residen...

In this paper, a modified two-fluid model has been adopted to simulate the process of upward vertical subcooled flow boiling of refrigerant R-113 in a vertical annular channel at low pressure. The modified model considers temperature dependent properties and saturation temperature variation and was validated against a number of published low-pressure subcooled boiling experiments. The results s...

Laser Doppler Velocimetry (LDV) has been employed to determine pseudo-turbulence characteristics of the flow field around bubble train forming in non-Newtonian caboxymethylcellulose (CMC) aqueous solution at low gas flow rate condition. The Reynolds stress and turbulent intensity of the liquid were investigated by means of Reynolds time-averaged method. The experimental results show that ax...

The fluid mechanics principle is used extensively in designing axial flow fans and their associated equipment. This paper presents a computational fluid dynamics (CFD) modeling of air flow distribution from a radiator axial flow fan used in an acid pump truck Tier4 (APT T4) Repower. This axial flow fan augments the transfer of heat from the engine mounted on the APT T4. CFD analysis was perform...

The stability of supercritical Couette flow has been studied extensively, but few measurements of the velocity field of flow have been made. Particle image velocimetry (PIV) was used to measure the axial and radial velocities in a meridional plane for non-wavy and wavy Taylor–Couette flow in the annulus between a rotating inner cylinder and a fixed outer cylinder with fixed end conditions. The ...

A best evidence topic in cardiac surgery was written according to a structured protocol. The question addressed was whether there is an optimal antithrombotic management for patients supported with axial-flow left ventricular assist devices (LVADs). Altogether, more than 758 papers were found using the reported search, of which 17 represented the best evidence to answer the clinical question. T...