Results of an investigation conducted to study the effect of fibre hybridization on the strength characteristics such as compressive strength, split tensile strength, and water permeability of steel fibre reinforced concrete (SFRC) are presented. Steel fibres of different lengths, that is, 12.5 mm, 25 mm, and 50 mm, having constant diameter of 0.6 mm, were systematically combined in different m...

Synopsis: This paper provides the state-of-the-art information on high-calcium, ASTM Class C fly ash use in cement-based construction materials, such as high-performance concrete, ready-mixed concrete, and low-strength flowable concrete. The major topics included are: properties of fly ash, effects of fly ash inclusion on fresh and hardened concrete and controlled low-strength materials (CLSM);...

This study investigates the effect of moisture conditioning on the Indirect Tensile Strength (ITS) of asphalt concrete. As a first step, cylindrical samples of 100 mm diameter and 50 mm thick were prepared using a Superpave gyratory compactor. Next, the samples were conditioned using Moisture Induced Susceptibility Test (MIST) device at different numbers of moisture conditioning cycles. In the ...

The Disposal of large quantity of plastic cover may cause pollution of land, water bodies and air. The proposed concrete which is made up by adding plastic in concrete may help to reuse the plastic cover as one of the constituents material of concrete, to improve the certain properties of concrete. The properties of concrete as varying percentages of plastic will test for compressive strength a...

In this study, Wood Ash (WA) prepared from the uncontrolled burning of the saw dust is evaluated for its suitability as partial cement replacement in conventional concrete. The saw dust has been acquired from a wood polishing unit. The physical, chemical and mineralogical characteristics of WA is presented and analyzed. The strength parameters (compressive strength, split tensile strength and f...

Compressive strength and splitting tensile strength are both mechanical properties of concrete that are utilized in structural design. This study presents gene expression programming (GEP) as a new tool for the formulations of splitting tensile strength from compressive strength of concrete. For purpose of building the GEP-based formulations, 536 experimental data have been gathered from existi...

The Double Punch test, an indirect traction test, is simulated numerically considering two different models (the nonlocal Mazars damage model and an heuristic crack model with joint elements). The test was designed to measure indirectly the tensile strength of concrete, hence, through these two numerical models, we are able to assess the tensile strength numerically. Experimental results presen...

This paper in essence presents comparative experimental data on the mechanical performance of steel and synthetic fibre-reinforced concrete under compression, tensile split and flexure. URW1050 steel fibre and HPP45 synthetic fibre, both with the same concrete design mix, have been used to make cube specimens for a compression test, cylinders for a tensile split test and beam specimens for a fl...

Freezing-thawing resistance is a very significant characteristic for concrete in severe environment (such as cold region with the lowest temperature below 0°C). In this study, ordinary-air-entrained (O-A-E) concrete was produced in a laboratory environment; the compressive strength, cubic compressive strength of C50, C40, C30, C25, and C20 ordinary-air-entrained concrete, tensile strength, and ...